Optimasi Sudut Ujung Pipa Penangkapan Gas Metana Pada Metode Arrow System

Zamzami Septiropa, Achmad Fauzan H.S, Moch. Zainuddin


Abstract


Drilling system on a pile of waste to get the methane gas is very difficult because the majority of waste that is made from plastic so it can get caught in the drill. Manual excavation
is not allowed because it is very dangerous, while digging with heavy equipment has not been able to do because it requires a special tool that is able to push and pull waste surface. Making
holes with arrow system method that is larger arrowhead from the arrow shaft, is one alternative that can be tried to get a hole / gas extraction wells at the Landfill Supit Urang - Malang.
Results hole larger than the arrow shaft is then filled with gravels as well extration methane in the landfill. The force required pile (arrow system) to the pole with pole diameter 26.7 cm and a maximum depth of 5.20 m (at point 1, the arrows point of 30˚ and 45˚) is a row of 63,087 kg and 79,717 kg . Optimum angle in terms of penetration force needs is the pole with arrowhead angle 30˚.

Keywords


Methane gas, Pile Foundation, Arrow System

Full Text:

pdf


DOI: https://doi.org/10.22219/JTIUMM.Vol12.No2.141-146 | Abstract views : 216 | pdf views : 216 |

Copyright (c) 2018 Jurnal Teknik Industri

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.


 
Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.