Author Guidelines

Author Guideline

Jurnal Teknik Industri (JTI) is an national journal, provides a forum for publishing the novel technologies related to Logistics and Supply Chain Management, Product Design dan Eco Product, Production System, Productivity Industrial System, Quality Management, Quality Engineering, Lean Manufacturin, Ergonomics, Human Factors Engineering, Performance Measurement Systems, Decision Analysis, Strategic Management, and Marketing Management. Scientific articles dealing with the following topics in Logistics and Supply Chain Management, Product Design dan Eco Product, Production System, Productivity Industrial System, Quality Management, Quality Engineering, Lean Manufacturin, Ergonomics, Human Factors Engineering, Performance Measurement Systems, Decision Analysis, Strategic Management, and Marketing Management, etc. are particularly welcome.

This journal encompasses original research articles, short communications, review articles (not preferable), including: Logistics and Supply Chain Management, Product Design dan Eco Product, Production System, Productivity Industrial System, Quality Management, Quality Engineering, Lean Manufacturin, Ergonomics, Human Factors Engineering, Performance Measurement Systems, Decision Analysis, Strategic Management, and Marketing Management.

All papers submitted to the journal must be written in good English or Indonesian. Authors for whom English is not their native language are encouraged to have their paper checked before submission for grammar and clarity. The work should not have been published or submitted for publication elsewhere.  

1. General Author Guidelines 

All manuscripts must be submitted to BCREC Editorial Office using Online Submission at E-Journal portal address: 

http://ejournal.umm.ac.id/index.php/industri/about/submissions#onlineSubmissions

where author register as Author by online. If authors have any problems on the online submission, please contact Editorial Office at the following email: ti.jurnal@umm.ac.id.

Three types of manuscripts are acceptable for publication: Original Research Articles, Short Communication, and Review Articles (not preferable, based on invitation).

2. Manuscript Template

Manuscript should be prepared according to the following author guidelines in the MS Word article template: https://drive.google.com/file/d/0B25b2s9ulT5aS1E3X1drYkltZ1E/view

3. Reviewing of manuscripts

Every submitted paper is independently reviewed by at least two peer-reviewers. The decision for publication, amendment, or rejection is based upon their reports/recommendation and made by Editor. If two or more reviewers consider a manuscript unsuitable for publication in this journal, a statement explaining the basis for the decision will be sent to the authors within three months of the submission date.

4. Revision of manuscripts

Manuscripts sent back to the authors for revision should be returned to the editor without delay. Revised manuscripts can be sent to editorial office through the Online Submission Interface (http://ejournal.umm.ac.id/index.php/industri/index). The revised manuscripts returned later than three months will be considered as new submissions.

5. Editorial Office of JTI Journal

All correspondences should be sent to the following Editorial Office:

Shanty Kusuma Dewi (Editor-in-Chief)

Editorial Office
Industrial Engineering Department,
University Muhammadiyah of Malang
Jl. Tlogomas No 246 Malang, Jawa Timur, Indonesia
Phone (+62) 341464318 ex 166

email : ti.jurnal@umm.ac.id

 

6. Guideline for Online Submission

Author should first register as Author and is offered as Reviewer through the following address: http://ejournal.umm.ac.id/index.php/industri/about/submissions#onlineSubmissions

The author should fulfill the form as detail as possible where the star marked form must be entered. After all form textbox was filled, Author clicks on “Register” button to proceed the registration. Therefore, Author is brought to online author submission interface where Author should click on “New Submission”. In the Start a New Submission section, click on “’Click Here’: to go to step one of the five-step submission process”. The following are five steps in online submission process:

  1. Step 1 - Starting the Submission: Select the appropriate section of the journal, i.e. Original Research Articles, Review Article, or Short Communication. Thus, the author must check-mark on the submission checklists. An author should type or copy-paste Covering Letter in Letter to Editor.
  2. Step 2 – Uploading the Submission: To upload a manuscript to this journal, click Browse on the Upload submission file item and choose the manuscript document file (.doc/.docx) to be submitted, then click "Upload" button until the file has been uploaded. Do not upload cover letter and other supplementary files here.
  3. Step 3 – Entering Submission’s Metadata: In this step, detail authors metadata should be entered including marked corresponding author. After that, manuscript title and abstract must be uploaded by copying the text and paste in the textbox including keywords.
  4. Step 4 – Uploading Supplementary Files: Supplementary file should be uploaded including Covering/Submission Letter, and Signed Copyright Transfer Agreement Form. Therefore, click on Browse button, choose the files, and then click on Upload button.
  5. Step 5 – Confirming the Submission:  Author should final check the uploaded manuscript documents in this step. To submit the manuscript to BCREC journal, click Finish Submission button after the documents are true. The corresponding author or the principal contact will receive an acknowledgment by email and will be able to view the submission’s progress through the editorial process by logging in to the journal web address site. 

After this submission, Authors who submit the manuscript will get a confirmation email about the submission. Therefore, Authors are able to track their submission status at any time by logging in to the online submission interface. The submission tracking includes a status of manuscript review and editorial process.

 

7. Author Fee (No Page Charge)

This journal charges the following author fees.

Article Submission: 0.00 (IDR)
Authors are not required to pay an Article Submission Fee as part of the submission process to contribute to review costs.

Article Publication: 0.00 (IDR)

If your manuscript is accepted for publication, you are not required to pay an Article Publication.

For details about Authors Charge here: 

http://ejournal.umm.ac.id/index.php/industri/pages/view/Article%20Processing%20Charger

 

8. User Rights

All articles published Open Access will be immediately and permanently free for everyone to read and download. We are continuously working with our author communities to select the best choice of license options, currently being defined for this journal as follows:

• Creative Commons Attribution-ShareAlike (CC BY-SA)


9. Manuscript Preparation Guidelines

MANUSCRIPT FORMAT

Manuscript should be uploaded to Jurnal Teknik Industri system and arranged in Jurnal Teknik Industri standard format, Title, Authors, Address and Email, Abstract, Keywords, Introduction, Methods, Result and Discussion, Conclusion, Acknowledgment and References. Typed at one side of white paper of A4 size, in single column, 1 space line, 10 point Century Schoolbook font and should be given line numbers. Margins for top and bottom are 3 cm, for left and right are 2,5 cm.

 

MANUSCRIPT TITLE

A Title Is Fewest Possible Words, Accurately Describe The Content (Maximum 10 Word, Uppercase, Century Schoolbook 14, Don’t Abbreviation)

 

AUTHORS

Manuscript has main author and co authors with full name of the author and co-authors (no abbreviation), includes address (es) and email addresses clearly.

 

ABSTRACT

The Abstract should be informative and completely self-explanatory, provide a clear statement of the problem, the proposed approach or solution, and point out major findings and conclusions. The Abstract should be 100 to 200 words in length. The abstract should be written in the past tense. Standard nomenclature should be used and abbreviations should be avoided. No literature should be cited.

 

KEYWORDS

The keywords should be avoiding general and plural terms and multiple concepts. Do not use words or terms in the title as keywords. These keywords will be used for indexing purposes. Keywords should not more than 5 words or phrases in alphabetical order.

 

INTRODUCTION

The Introduction should provide a clear background, a clear statement of the problem, the relevant literature on the subject, the proposed approach or solution, and the new value of research which it is innovation. It should be understandable to colleagues from a broad range of scientific disciplines. Introduction must be written using 600 until 1000 words

 

METHODS

Explaining research chronological, including research design, research procedure (in the form of algorithms, Pseudocode or other), how to test and data acquisition [1], [2]. The description of the course of research should be supported references, so the explanation can be accepted scientifically [3], [4]. A Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lays the foundation for further work. A Calculation section represents a practical development from a theoretical basis. Materials and methods must be written using 400 until 600 words.

 

RESULTS AND DISCUSSION

Explained the results of research and at the same time is given the comprehensive discussion. Results can be presented in figures, graphs, tables and others that make the reader understand easily [2], [5]. The discussion can be made in several sub-chapters.Unit of measurement used should follow the prevailing international system. All figures and tables placed separately at the end of  manuscript pages and should be active and editable by editor.

 

CONCLUSION

Conclusion should be explained clearly. Suggestion placed after conclusion contains a recommendation on the research done or an input that can be used directly by consumer. Conclusion and suggestion must be written using 70 until 150 words.

 

ACKNOWLEDGEMENT

State the grant source and the person to whom the grant was given. Name the person to help you work.

 

REFERENCES

The main references are international journals and proceeding. All references should be to the most pertinent and up-to-date sources. References are written in IEEE style. Each citation should be written in the order of appearance in the text. Please use a consistent format for references.

 

Example

If your references are from journal artilces:
[1]     Author1 A, Author2 B. Title of Manuscript. Name of Journal or its Abbreviation. year; Vol.(Issue): pages.
[2]     Casadei D, Serra G, Tani K. Implementation of a Direct Control Algorithm for Induction Motors Based on Discrete Space Vector Modulation. IEEE Transactions on Power Electronics. 2007; 15(4): 769-777. (in this case Vol.15, Issues 4, and page 769-777)

If your references are from Proceeding artilces:
If the proceedings consists of several volumes
[3]     Author1 A, Author2 B. Title of Manuscript. Name of Conference of Seminar. City. Year; volume: pages.
[4]     Calero C, Piatiini M, Pascual C, Serrano MA. Towards Data Warehouse Quality Metrics. Proceedings of the 3rd Intl. Workshop on Design and Management of Data Warehouses (DMDW). Interlaken. 2009; 39: 2-11. (in this case, city: Interlaken, year: 2009, Vol.39, page: 2-11)

If the proceedings in single volume
[5]     Author1 A, Author2 B. Title of Manuscript. Name of Conference or Seminar. City. year: pages.
[6]     Yamin L, Wanming C. Implementation of Single Precision Floating Point Square Root on FPGAs. IEEE Symposium on FPGA for Custom Computing Machines. Napa. 2008: 226-232.

If your references are from Texbooks:
If the references are refer to specific page range in a book
[7]     Author1 A, Author2 B. The Title of the Book. Edition. City: Publishert. year: pages.
[8]     Mohan N, Undeland TM, Robbins WP. Power Electronics. New York: John Wiley & Sons. 2005: 11-13.
[9]     Ward J, Peppard J. Strategic planning for Information Systems. Fourth Edition. West Susse: John Willey & Sons Ltd. 2007: 102-104.

If the references are refer to some separate pages in a book.
[10]     Author1 A, Author2 B. Judul Buku. City: Publisher. Year.
[11]     Mohan N, Undeland TM, Robbins WP. Power Electronics. New York: John Wiley & Sons. 2005.
[12]     Ward J, Peppard J. Strategic planning for Information Systems. Fourth Edition. West Susse: John Willey & Sons Ltd. 2007.

Edited book:
[13]     Author1 A, Author2 B. Editors. Title of the Book. City: Publisher. Year.
[14]     Zade F, Talenta A. Editors. Advanced Fuzzy Control System. Yogyakarta: UAD Press. 2010.

Chapter in a book:
[15]     Author1 A, Author2 B. Title of the Book. In: Editor1 A, Editor2, B. Title of the Book. Edition. City: Publisher. Year: pages.
[16]     Arkanuddin M, Fadlil A, Sutikno T. A Neuro-Fuzzy Control for Robotic Application Based on Microcontroller. In: Krishnan R, Blaabjerg F. Editors. Advanced Control for Industrial Application. 2nd ed. London: Academic Press; 2006: 165-178.

Translated Books.
[17]     Originil Author. Year. Title of the Translated Book. Translater. City: Publisher of the translated book. Year of the translated book.
[18]     Pabla. 2004. Sistem Distribusi Tenaga Listik. Abdul Hadi. Jakarta: Erlangga. 2007.

If your references are from Thesis/Disertation:
[19]     Author. Title of Thesis/Disertation. Thesis/Disertation. City & Name of University/Institute/College; Year.
[20]     Rusdi M. A Novel Fuzzy ARMA Model for Rain Prediction in Surabaya. PhD Thesis. Surabaya: Postgraduate ITS; 2009.

If your references are from Paten:
[21]     Author1 A, Author2 B.. Title (this should be in italics). Patent number (Patent). Year of publication.
[22]     Ahmad LP, Hooper A. The Lower Switching Losses Method of Space Vector Modulation. CN103045489 (Patent). 2007.

If your references are from Standards:
[23]     Name of Standard Body/Institution. Standard number. Title (this should be in italics). Place of publication. Publisher. Year of publication.
[24]     IEEE Standards Association. 1076.3-2009. IEEE Standard VHDL Synthesis Packages. New York: IEEE Press; 2009.

If your references are from Reports
[25]     Author/Editor (if it is an editor/editors always put (ed./eds.) after the name). Title (this should be in italics). Organisation. Report number: (this should be followed by the actual number in figures). Year of publication.
[26]     James S, Whales D. The Framework of Electronic Goverment. U.S. Dept. of Information Technology. Report number: 63. 2005.

The authors must refer to Jurnal Teknik Industri Journal for writing format and style (Please download and use as the template for initial manuscript submission). This will ensure fast processing and publication. Any papers not fulfilling the requirements based on the guideline to authors will not be processed.