Improving lecturers’ competence in preparing lesson plans of soil test laboratory and building information management
DOI:
https://doi.org/10.22219/jcse.v3i1.16718Keywords:
Building information management, Learning plan, Soil test laboratoryAbstract
The insufficient number of lecturers and laboratory assistants has become one of the obstacles faced by STT Pagaralam. In addition, the limited ability of lecturers in mastering Soil Mechanics laboratory equipment and the absence of Semester Learning Plans (RPS) that follow the learning format are still obstacles. The purpose of this community service is to improve the competence of lecturers in preparing the RPS for the soil test laboratory and building Information management. The method used to carry out this community service were workshops and seminars. It was initiated by giving a seminar on the introduction of building information management application followed by 20 students and continued by providing training on the use of tools for five laboratory assistants and the preparation of Semester Learning Plans for five lecturers. The results of the service implementation based on the participant satisfaction questionnaire shows an increase in knowledge on the application of building information management and an increase in competence using laboratory equipment. In addition, the training participants were also provided with modules.
Downloads
References
Agirbas, A. (2020). Teaching construction sciences with the integration of BIM to undergraduate architecture students. Frontiers of Architectural Research, 9(4), 940–950. https://doi.org/10.1016/j.foar.2020.03.007
Ahmad, S. (2015). Kompetensi dosen UIN Syarif Hidayatullah Jakarta dalam pelaksanaan evaluasi pembelajaran: telaah atas konstruksi soal uas perspektif higher education. Salam; Jurnal Sosial Dan Budaya Syar’i, 2(1), 190–208.
Azhar, S., Khalfan, M., & Maqsood, T. (2012). Building information modeling (BIM): Now and beyond. Australasian Journal of Construction Economics and Building, 12(4), 15–28. https://doi.org/10.5130/ajceb.v12i4.3032
Bai, C., Dallasega, P., Orzes, G., & Sarkis, J. (2020). Industry 4.0 technologies assessment: A sustainability perspective. International Journal of Production Economics, 229, 107776. https://doi.org/10.1016/j.ijpe.2020.107776
Beier, G., Niehoff, S., & Hoffmann, M. (2021). Industry 4.0: a step towards achieving the SDGs? A critical literature review. Discover Sustainability, 2(1). https://doi.org/10.1007/s43621-021-00030-1
Berawi, M. A. (2019). The role of industry 4.0 in achieving Sustainable Development Goals. International Journal of Technology, 10(4), 644–647. https://doi.org/10.14716/ijtech.v10i4.3341
Borrmann, A., König, M., Koch, C., & Beetz, J. (2018). Building information modeling: Technology foundations and industry practice. Building Information Modeling: Technology Foundations and Industry Practice, September, 1–584. https://doi.org/10.1007/978-3-319-92862-3
Fakhruddin, F., Parung, H., Tjaronge, M. W., Djamaluddin, R., Irmawaty, R., Amiruddin, A. A., Djamaluddin, A. R., Harianto, T., Muhiddin, A. B., Arsyad, A., & Nur, S. H. (2019). Sosialisasi Aplikasi Teknologi Building Information Modelling (BIM) pada Sektor Konstruksi Indonesia. TEPAT Jurnal Teknologi Terapan Untuk Pengabdian Masyarakat |, 2(2), 112–119. https://doi.org/10.25042/jurnal_tepat.v2i2.82
Fargnoli, M., & Lombardi, M. (2020). Building information modelling (BIM) to enhance occupational safety in construction activities: Research trends emerging from one decade of studies. Buildings, 10(6). https://doi.org/10.3390/BUILDINGS10060098
Kusnan, K. (2017). Kebijakan peningkatan mutu dosen. Jurnal Pendidikan Islam Iqraï, 11(2), 53–68.
Laksmiwati, D., Wildan, W., Mumbrita, S., & Sujana, I. M. (2019). Pelatihan dan pendampingan penyusunan RPS dan RTM untuk dosen-dosen Universitas Nadhatul Ulama (unu) Nusa Tenggara Barat. Jurnal Pendidikan Dan Pengabdian Masyarakat, 2(2), 170–176.
Lembaga Penjaminan Mutu. (2018). Standar Mutu Internal Pendidikan Institut Agama Islam Negeri Ponorogo. IAIN Ponorogo.
Maskuriy, R., Selamat, A., Ali, K. N., Maresova, P., & Krejcar, O. (2019). Industry 4.0 for the construction industry-How ready is the industry? Applied Sciences (Switzerland), 9(14). https://doi.org/10.3390/app9142819
Matějka, P., & Tomek, A. (2017). Ontology of BIM in a Construction Project Life Cycle. Procedia Engineering, 196(June), 1080–1087. https://doi.org/10.1016/j.proeng.2017.08.065
Mondejar, M. E., Avtar, R., Diaz, H. L. B., Dubey, R. K., Esteban, J., Gómez-Morales, A., Hallam, B., Mbungu, N. T., Okolo, C. C., Prasad, K. A., She, Q., & Garcia-Segura, S. (2021). Digitalization to achieve sustainable development goals: Steps towards a Smart Green Planet. Science of The Total Environment, 794, 148539. https://doi.org/10.1016/j.scitotenv.2021.148539
Moses, T., Heesom, D., & Oloke, D. (2015). The Impact of Building Information Modelling (BIM) for Contractor Costing in Offsite Construction Projects in the UK. Modular and Offsite Construction (MOC) Summit Proceedings, 331–338. https://doi.org/10.29173/mocs191
Muslim, M., Setiawan, D., & Saputra, H. D. (2021). Pengembangan Kompetensi Dosen melalui Sosialisasi Penyusunan Rencana Pembelajaran Semester (RPS) Era Revolusi Industri 4.0. Jurnal Pengabdian Pada …, 6(1), 107–115. https://ppm.ejournal.id/index.php/pengabdian/article/download/737/346
Panjaitan, T. B. (2016). Penyusunan rencana pengembangan sekolah di SDN Kecamatan Padang Timur Kota Padang.
Pu, L., & Wang, Y. (2021). The Combination of BIM Technology with the Whole Life Cycle of Green Building. World Journal of Engineering and Technology, 09(03), 604–613. https://doi.org/10.4236/wjet.2021.93042
Sinenko, S., Hanitsch, P., Aliev, S., & Volovik, M. (2020). The implementation of BIM in construction projects. E3S Web of Conferences, 164, 1–9. https://doi.org/10.1051/e3sconf/202016408002
Sitepu, B. P., & Lestari, I. (2017). Pelaksanaan Rencana Pembelajaran Semester Dalam proses Pembelajaran di perguruan tinggi. Perpektif Ilmu Pendidikan, 32(1), 43–51.
Sudiarta, I. N. (2016). Jurnal Kajian Pendidikan Widya Accarya FKIP Universitas Dwijendra ISSN NO. 2085-0018 Maret 2016. Jurnal Kajian Pendidikan Widya Accarya FKIP Universitas Dwijendra, 5(1), 67–76.
Susanti, R. W., Naim, R., Tulak, G. T., Saputri, E., Muhdar, M., Rosmiati, R., & Baeda, A. G. (2021). Pelatihan Dosen Keperawatan dalam Penggunaan Aplikasi RPS Digital. Karya Kesehatan Journal of Community Engagement, 2(1), 1–5.
Tahir, M. M., Haron, N. A., Alias, A. H., Al-Jumaa, A. T., Muhammad, I. B., & Harun, A. N. (2018). Applications of building information model (BIM) in Malaysian construction industry. IOP Conference Series: Materials Science and Engineering, 291(1). https://doi.org/10.1088/1757-899X/291/1/012009
Vite, C., & Morbiducci, R. (2021). Optimizing the sustainable aspects of the design process through building information modeling. Sustainability (Switzerland), 13(6). https://doi.org/10.3390/su13063041
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Efrilia Rahmadona, M. Sang Gumilar Panca Putra, M. Norca Praditya , Rio Marpen, Kiki Rizky Amalia, M. Abdullah Uwais
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.