Innovation and empowerment of CNC 2-axis laser use in Jogja Mastercraft in Yogyakarta, Indonesia
DOI:
https://doi.org/10.22219/jcse.v6i1.29493Keywords:
Jogja Mastercraft, Watches, Glasses, CNC, e-commerceAbstract
Indonesia has the most significant percentage of wood producers worldwide, with 31.24% being furniture and handicraft products. Jogja Mastercraft's creative industry, owned by Mr. Iyos, was established in 2015 and has a turnover of 15 million monthly. This business had been impacted by the COVID-19 pandemic, which reduced labor and decreased the price of eyewear products and wooden watches. Wooden glasses and watches are handicrafts that have high value and are made from the primary material of wood waste. So that if sold and marketed, it has high potential in local and international markets. Some crucial problems are caused by Jogja Mastercraft partners using a manual process in making body bezels and cases on watches and frames on wooden glasses. This makes the product work up to 6 hours, and making glass frames takes 4 hours. In addition, the work on the bezel and case with a scroll saw machine also makes the final result less neat and precise. The second problem is that there are no effective marketing methods and strategies for increasing the sales figures of wooden watch products, so a Joomla-based e-commerce website is needed so that wooden watch sales can be optimal. The main methods and outputs carried out in the implementation of Community Empowerment (PBM) include the application of CNC (Computer Numerically Controlled) technology through the manufacture of laser-type CNC designs with two axes to increase productivity and quality of bezels and cases from wood clocks, provide training and guidance in managing effective marketing management and product promotion, and produce e-commerce websites.
Downloads
References
BPS kabupaten Kulon Progo Provinsi D.I.Yogyakarta, 2021, Kecamatan Samigaluh Dalam Angka 2021. Katalog BPS kecamatan Samigaluh.
Ma'arif, A., & Rahmat Setiawan, N. (2021). Control of DC Motor Using Integral State Feedback and Comparison with PID: Simulation and Arduino Implementation. Journal of Robotics and Control (JRC), 2(5), 456-461. doi:https://doi.org/10.18196/jrc.25122
Ma’arif, A., Nabila, H., & Wahyunggoro, O. (2019, November). Application of intelligent search algorithms in proportional-integral-derivative control of direct-current motor system. In Journal of Physics: Conference Series (Vol. 1373, No. 1, p. 012039). IOP Publishing. https://doi.org/10.1088/1742-6596/1373/1/012039
Maharani, D. D. Pembuatan aplikasi visualisasi 3 dimensi kacamata menggunakan metode box modeling berbasis android (studi kasus: rumah kacamata indah optik) (Bachelor's thesis, Fakultas Sains Dan Teknologi Universitas Islam Negeri Syarif Hidayatullah Jakarta).
Mulyono, S., Markus, A. H., & Mulyani, W. (2022). Laundry wastewater treatment using active carbon media from coconut shell, matoa shaws powder, iron and lingua wood. Biolink (Jurnal Biologi Lingkungan Industri Kesehatan), 9(1), 106-115.
Nareswari T, D. N. (2018). Analisis Preferensi Konsumen Jam Tangan Kayu dengan Metode Analytical Hierarchy Process (Doctoral dissertation, Universitas Gadjah Mada)
Payne, A. & Frow, P. , (2013). "Strategi" Customer Management", Cambri" ge
Prianto, E., & Eng, M. (2017). Proses permesinan cnc dalam pembelajaran simulasi CNC. Jurnal Edukasi Elektro, 1(1).
Setiawan R. (2020). Prototipe Media Pembelajaran Historical Interractive Virtual Reality. Laporan Penelitian UNY. Tidak dipublikasikan.
Setiawan R. (2021). Prototipe Storyboard Virtual Reality History of Java. Laporan Penelitian UNY. Tidak dipublikasikan.
Setiawan, N. (2019). Sistem kendali orientasi quadrotor berbasis so (3) dengan linierisasi pada moving operating point (Doctoral dissertation, Universitas Gadjah Mada)
Setiawan, N., & Pratama, G. N. P. (2021, November). Application of LQR Full-State Feedback Controller for Rotational Inverted Pendulum. In Journal of Physics: Conference Series (Vol. 2111, No. 1, p. 012006). IOP Publishing. https://doi.org/10.1088/1742-6596/2111/1/012006
Setiawan, R. (2017). PKM HOME INDUSTRI JENANG DI KABUPATEN KUDUS. Jurnal Pawiyatan Vol 25. No.2 http://e-journal.ivet.ac.id/index.php/pawiyatan/article/view/711
Setiawan, R. (2021). Vaname shrimp farm cultivation with microbubble technology in Mirit Kebumen Regency. ICERI 4th Universitas Negeri Yogyakarta.
Setiawan, R., Nugroho, A. N. P., Hadi, K., Laksana, N. Y., & Widianto, H. W. (2021). Historical interactive virtual reality learning in college. Harmoni Sosial: Jurnal Pendidikan IPS, 8(2), 73-79. http://dx.doi.org/10.21831/hsjpi.v8i2.46831
Setiawan, R., Yuliantri, R. D. A., & Rosyadi, S. (2023). Pengembangan Komunitas Taman Wisata Bunga Matahari Pantai Glagah Kulon Progo Yogyakarta. Manggali, 3(1), 11-27. https://doi.org/10.31331/manggali.v3i1.2329.
Surono, S., & Harjanto, C. T. (2019). Pengembangan Paket Latihan dan Penilaian Berbantuan Komputer untuk Pembelajaran Alat Ukur Mekanik Presisi. Jurnal Dinamika Vokasional Teknik Mesin, 4(2), 134-143 https://doi.org/10.21831/dinamika.v4i2.27399
Parker, R. (2019). "Application of 2-Axis CNC Machine Tools in Craft Production." Journal of Manufacturing Processes, 46, 23-35.
Sadiq, M., & Yusof, N. (2017). "Empowerment of Local Communities in Furniture Making through CNC Technology." International Journal of Community Development, 12(4), 72-80.
Jannah, D. (2020). "The Role of Technology in Enhancing Productivity: A Case Study of CNC in Small Business Manufacturing." Proceedings of the International Conference on Innovation and Entrepreneurship, 109-115.
Hartanto, D., & Ahmad, Z. (2021). "Utilization of CNC Laser for Efficient Woodworking Production." Journal of Industrial Engineering and Management, 15(2), 245-257.
Liu, F., Zhang, Y., & Zhou, Q. (2018). "Laser Cutting Technology: Innovations and Applications in the Manufacturing Industry." Journal of Laser Technology, 29(6), 204-211.
Mulyono, R. (2022). "Woodworking Craft Innovation with CNC Laser Cutting." International Journal of Design and Crafting, 19(2), 150-160.
Sundaram, V., & Kumar, D. (2020). "Impact of CNC Technology on Woodcraft and Small Enterprises." Journal of Business and Technology, 10(1), 55-64.
Aziz, R., & Yatim, N. (2021). "Technological Empowerment in Local Craft Industries: Case Study on CNC Machines in Yogyakarta." Journal of Local Economic Development, 9(3), 89-101.
Han, L., & Wei, X. (2018). "Innovation in Craft Production: An Exploration of CNC Technology and Its Market Potential." International Journal of Innovative Manufacturing, 32(4), 112-120.
Santoso, D., & Prasetyo, A. (2021). "Application of CNC Laser Technology in Improving Crafting Efficiency in Small Businesses." Procedia Manufacturing, 54, 203-208.
Indra, T., & Harjo, M. (2022). "Enhancing Productivity in Small Business Crafting with CNC Machines: Challenges and Opportunities." Journal of Engineering and Technology, 16(1), 95-105.
Kusuma, A., & Agung, P. (2019). "The Role of CNC in Empowering Handicraft Industry: A Case Study of Wooden Watches." International Journal of Industrial Engineering, 28(7), 45-53.
Arif, F., & Reza, K. (2020). "CNC Laser Technology for Efficient Wood Processing in Craft Production." Journal of Materials Science and Engineering, 24(5), 233-240.
Widianto, T., & Haryanto, R. (2021). "Productivity Improvement and Waste Reduction in Wooden Crafting with CNC Technology." Asian Journal of Manufacturing Engineering, 10(3), 88-97.
Rudyanto, S., & Sukarno, H. (2019). "The Impact of CNC Laser on the Growth of Handicraft SMEs." Business and Technology Journal, 12(4), 123-134.
Mardiana, I., & Agus, S. (2020). "Empowering Small Enterprises with CNC Technology: Innovations in Wooden Watches." Proceedings of the International Conference on SME Development, 78-86.
Lestari, M., & Santosa, B. (2020). "The Adoption of CNC Laser Machines in the Crafting Industry for Enhancing Competitiveness." Technology and Innovation Journal, 22(1), 101-108.
Zulfiqar, A., & Kurniawan, D. (2018). "Sustainability in the Handicraft Industry: Leveraging CNC Machines for Environmental Impact Reduction." International Journal of Sustainable Development, 14(6), 345-356.
Subroto, H., & Agung, R. (2019). "Improvement of Craft Product Quality Using CNC Machines: A Study on Wooden Crafts." Proceedings of the National Conference on Manufacturing Technology, 210-215.
Sari, M., & Wijaya, H. (2021). "Incorporating CNC Laser Technology for Enhancing Precision in Woodworking Crafts." International Journal of Crafting and Design, 18(4), 177-185.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Setiawan, et al
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
