Design of Hollow Cone Water Gate with Hydraulic System in Karangkates Dam

Authors

  • Mulyono Mulyono Universitas Muhammadiyah Malang
  • M Irkham Mamungkas Universitas Muhammadiyah Malang
  • Candra Dwi Febrian Universitas Muhammadiyah Malang

DOI:

https://doi.org/10.22219/jemmme.v6i2.19461

Abstract

Water gate system in a dam is to control the water flow. It also controls the water surface elevation being stored or routed. The hollow cone type was designed as it has the most efficient energy of dissipation. It also has a simple construction, a relatively affordable cost, and it can be operated electromagnetically or in the hydraulic system. The hollow cone design gives a stable debit coefficient and can be implemented on a big scale. The method used in this design is the data collection and calculation of dimension scale and water gate capacity. The result of the calculation determined the capability of the hollow cone water gate to control the maximum debit of 5,9251 m³/s, the operation load of 2.875,92 kg, tensile stress around the valve 2,0108 kg/mm2. The design of the hollow cone system used the SC30C of the M20 nut.

Downloads

Download data is not yet available.

References

I. Kasiro, D. P. Isdiana, C. L. Nugroho, A. Muchtar, dan R. S. Hari Martadi, “Bendungan Besar di Indonesia,” Pus. Penelit. dan Pengemb. Pengairan, Dept. PU, Dirjen Pengair., 1995, [Daring]. Tersedia pada: https://luk.staff.ugm.ac.id/BendunganBesarDiIndonesia.pdf.

Andrijanto dan R. Sudiana, “Data Operasi Waduk dan PLTA Harian,” 2012. .

A. Indarto dan P. Tri Juwono, “Kajian Potensi Sungai Srinjing Untuk Pembangkit Listrik Tenaga Mikrohidro (Pltmh) Brumbung Di Kabupaten Kediri,” J. Tek. Pengair., vol. 3, no. 2, hal. 174–184, 2012, [Daring]. Tersedia pada: https://jurnalpengairan.ub.ac.id/index.php/jtp/article/view/162.

A. Maryono, W. Muth, dan N. Eisenhauer, “Hidrolika terapan,” Yogyakarta. Pradnya Paramita, 2001.

A. Soedradjat, “Mekanika-Fluida Dan Hidrolika,” Nova, Bandung, 1983.

R. K. Linsley, Water-resources engineering. WW Norton & Company, 1976.

I. Sularso dan K. Suga, “Dasar perencanaan dan pemilihan elemen mesin,” 1991.

Downloads

Published

2021-12-30

How to Cite

Mulyono, M., Mamungkas, M. I., & Febrian, C. D. (2021). Design of Hollow Cone Water Gate with Hydraulic System in Karangkates Dam. Journal of Energy, Mechanical, Material, and Manufacturing Engineering, 6(2), 141–144. https://doi.org/10.22219/jemmme.v6i2.19461

Issue

Vol. 6 No. 2 (2021)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.