Tensile Strength Prediction of Empty Palm Oil Bunch Fiber Composite with Artificial Neural Network
DOI:
https://doi.org/10.22219/jemmme.v9i2.35619Keywords:
Artificial Neural Network (ANN), Backpropagation, Palm Oil Empty Bunches (POEB), Radial Basis Function (RBF)Abstract
As the leading global producer of palm oil, Indonesia encounters substantial environmental challenges arising from the waste generated by empty palm oil fruit bunches (EPOFB). This research aims to develop an accurate Artificial Neural Network (ANN) model to predict the tensile strength of EPOFB fiber-reinforced composites. The method involves two types of ANN, namely Radial Basis Function (RBF) and Backpropagation, with testing using variations in immersion time, volume fraction, and length of EPOFB fibers. The research results show that both ANN models can predict tensile strength with a Mean Absolute Error (MAE) below 10%. However, the Backpropagation ANN shows superior performance with a training MAE of 0.0078 and a testing MAE of 0.45, compared to the RBF ANN, which has a training MAE of 0.371 and a testing MAE of 0.53. In conclusion, ANN Backpropagation is superior in prediction accuracy and characterization efficiency of EFB fiber-reinforced composites, offering an economical solution and supporting sustainable palm oil waste management.
Downloads
References
Shigetomi Y, Ishimura Y, Yamamoto Y. Trends in global dependency on the Indonesian palm oil and resultant environmental impacts. Sci Rep. 2020 Nov;10(1):20624. DOI: https://doi.org/10.1038/s41598-020-77458-4
Mahardika M, Zakiyah A, Ulfa SM, Ilyas RA, Hassan MZ, Amelia D, et al. Recent Developments in Oil Palm Empty Fruit Bunch (OPEFB) Fiber Composite. Journal of Natural Fibers. 2024 Dec;21(1). DOI: https://doi.org/10.1080/15440478.2024.2309915
Faizi MK, Bakar SA, Majid MSA, Mohd SB, Tamrin, Israr HA, et al. Tensile Characterizations of Oil Palm Empty Fruit Bunch (OPEFB) Fibres Reinforced Composites in Various Epoxy/Fibre Fractions. Biointerface Res Appl Chem. 2021 Nov;12(5):6148–63. DOI: https://doi.org/10.33263/BRIAC125.61486163
Bakri B, Naharuddin, Mustafa, Seleng K, Chandrabakty S, Iqbal M, et al. Tensile Strength and Water Absorption of Oil Palm Mesocarp Fiber Reinforced Polyester Composites: Effect of Volume Fraction of Fiber. IOP Conf Ser Earth Environ Sci. 2022 Nov;1075(1):012003. DOI: https://doi.org/10.1088/1755-1315/1075/1/012003
Mujianto A, Latipah AJ, Waloyo HT, Adytama F. Effect of Fiber Immersion Time on Alkaline Treatment to the Mechanical Strength of the Composite Reinforced Oil Palm Empty Fruit Bunches (OPEFB) Fibers. 2022; DOI: https://doi.org/10.2991/978-94-6463-134-0_14
Hofmann M, Shahid AT, Machado M, Garrido M, Bordado JC, Correia JR. GFRP biocomposites produced with a novel high-performance bio-based unsaturated polyester resin. Compos Part A Appl Sci Manuf. 2022 Oct 1;161. DOI: https://doi.org/10.1016/j.compositesa.2022.107098
Zhu D, Wu HH, Hou F, Zhang J, Gao Z, Shang C, et al. A transfer learning strategy for tensile strength prediction in austenitic stainless steel across temperatures. Scr Mater. 2024 Oct;251:116210. DOI: https://doi.org/10.1016/j.scriptamat.2024.116210
Yang J, Ji C, Wang D, Zhang H, Zhou Z, Hu J, et al. Fire behavior and post-fire residual tensile strength prediction of carbon fiber/phthalonitrile composite laminates. Compos Sci Technol. 2024 Jun;252:110624. DOI: https://doi.org/10.1016/j.compscitech.2024.110624
Yamamoto G, Oshima K, Ramadhan RA, Lim T, Megra YT, Suk JW, et al. Tensile strength prediction of unidirectional polyacrylonitrile (PAN)-based carbon fiber reinforced plastic composites considering stress distribution around fiber break points. Compos Part A Appl Sci Manuf. 2024 Aug;183:108234. DOI: https://doi.org/10.1016/j.compositesa.2024.108234
Mujianto A, Waloyo HT. Studi Kelayakan Serat Tandan Kosong Kelapa Sawit Sebagai Penguat Komposit Untuk Aplikasi Lambung Kapal. Manutech : Jurnal Teknologi Manufaktur. 2023;15(1). DOI: https://doi.org/10.33504/manutech.v15i01.270
Pratama, farid M. Pengaruh Proses Alkalisasi terhadap Morfologi Serat Tandan Kosong Kelapa Sawit untuk Bahan Penguat Komposit Absorbsi Suara. JURNAL TEKNIK ITS. 2017;6. DOI: 10.12962/j23373539.v6i2.24274
Farid M. Isolasi Selulosa dari Serat Tandan Kosong Kelapa Sawit untuk Nano Filler Komposit Absorpsi Suara: Analisis FTIR. JURNAL TEKNIK ITS. 2017;6(2). DOI: 10.12962/j23373539.v6i2.24098
Lee J, Park D, Park K, Song H, Kim TS, Ryu S. Optimization of grid composite configuration to maximize toughness using integrated hierarchical deep neural network and genetic algorithm. Mater Des. 2024 Feb;238:112700. DOI: https://doi.org/10.1016/j.matdes.2024.112700
Ma S, Wu X, Fan L, Xie Z. Predicting water flux and reverse solute flux in forward osmosis processes using artificial neural networks (ANN) modelling with structural parameters. Sep Purif Technol. 2024 Dec;351:128092. DOI: https://doi.org/10.1016/j.seppur.2024.128092
Zhang M, Lin B, Ma X, Wang H, Nie L, Li L, et al. Application of artificial intelligence combined with near infrared spectroscopy in the continuous counter-current extraction process of Angelica dahurica formula granules. Spectrochim Acta A Mol Biomol Spectrosc. 2024 Dec;322:124748. DOI: https://doi.org/10.1016/j.saa.2024.124748
Hameed J, Huo C, Albasher G, Naeem MA. Revisiting the nexus between financialization and natural Resource efficiency through the lens of financial development and green industrial optimization. J Clean Prod. 2024 Aug;468:143066. DOI: https://doi.org/10.1016/j.jclepro.2024.143066
G. Nivedhitha, P. Kalpana, Rajagopal R, Anusha Rani V, Ajith. B. Singh, Sheik Sidthik A. Novel Deep Learning Neural Networks for Breast Cancer Malignancy Estimation. Journal of Advanced Research in Applied Sciences and Engineering Technology. 2024 Jun;47(1):140–51. DOI: https://doi.org/10.37934/araset.47.1.140151
Wu Z, Chen L, Xiong H. Regression algorithms-driven mechanical properties prediction of angle bracket connection on cross-laminated timber structures. Journal of Wood Science. 2024 Jan;70(1):3. DOI: https://doi.org/10.1186/s10086-023-02110-4
Yang B, Lu X, Sun S, Liang SY. Tensile strength prediction and process parameters optimization of FSW thick AA2219-T8 based on ANN-GA. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2024 Jul;46(7):388. DOI: https://doi.org/10.1007/s40430-024-04962-3
Ma M li, Huang Z kun, Liao Y hang, Zhou L yi, Jia L jie, Liang C zhen, et al. Hybrid hyperplane gradient learning algorithm for RBF neural network. Neurocomputing. 2024 Jun;587:127626. DOI: https://doi.org/10.1016/j.neucom.2024.127626
Lechuga-Gutierrez L, Chel-Puc N, Macias-Garcia E, Bayro-Corrochano E. Nested Polynomials to Increase the Plasticity of Artificial Neural Networks. In: 2022 Asia Conference on Advanced Robotics, Automation, and Control Engineering (ARACE). IEEE; 2022. p. 115–20. DOI: 10.1109/ARACE56528.2022.00028
Aggarwal C. The Backpropagation Algorithm. In: Neural Networks and Deep Learning. Cham: Springer International Publishing; 2023. p. 29–71.
Aggarwal C. Radial Basis Function Networks. In: Neural Networks and Deep Learning. Cham: Springer International Publishing; 2023. p. 215–30.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
