Effect of magnesium addition in aluminum A1100 casting process on its hardness

Authors

  • Muhammad Rigel Universitas Muhammadiyah Malang
  • Murjito Murjito University of Muhammadiyah Malang
  • Mohamad Irkham Mamungkas Universitas Muhammadiyah Malang

Abstract

This study investigated the effect of adding magnesium to the hardness of aluminum A 1100 in the casting process using Rockwell testing. Aluminum A 1100 is known to have relatively low mechanical strength but has good corrosion properties. The addition of magnesium is done to increase the hardness of aluminum A 1100. Aluminum A 1100 samples are made with variations of adding 0%, 2%, 4%, and 6% by weight. Casting is carried out using prepared sand molds, and the resulting A 1100 aluminum specimens are tested by Rockwell testing. The findings could guide industries that use aluminum A 1100 in applications requiring higher hardness, such as automotive or manufacturing. In addition, this research may serve as a foundation for further studies on the effect of magnesium addition on the mechanical properties of aluminum A 1100 using different test methods.

Downloads

Download data is not yet available.

References

Fauzan, Wafir Dini. 2019. “Pengaruh Variasi Temperatur Perlakuan Age Hardening Pada Aluminium Paduan 6061 Terhadap Sifat Kekerasan, Struktur Mikro Dan Laju Korosi Dalam Larutan HCL 1M.” (September): 24.

Fayakun, Choirul. 2018. “Pengaruh Penambahan Unsur Zinc ( Zn ) Terhadap Laju Korosi Dan Struktur Mikro Paduan Aluminium-Indium-Zinc ( Al- In-Zn ) Untuk Aplikasi Anoda Tumbal Berbasis Aluminium Pada Kapal.”

Kautsar, Ahmad Al. 2021. “Pengaruh Penambahan Unsur Paduan Dan Nano Al2O3 Terhadap Karakterisasi Komposit ADC12/NanoAl2O3 Dengan Metode Stir Casting.” Digital Repository Universitas Jember (September 2019): 2019–22.

Miftakh, Yusuf dan Jamaludin. 2018. “Analisis Pengaruh Electroplating Pada Aluminium Alloy 2024 Menggunakan Nikel Dan Krom Terhadap Laju Korosi Dengan Metode Polarisasi Linier.” Seminar Nasional Inovasi Teknologi Penerbangan (SNITP) (September): 1–6.

Mizhar, Susri. 2016. “Pengaruh Penambahan Magnesium Terhadap Kekerasan , Kekuatan Impak Dan Struktur Mikro” 2 (2): 77–84.” Jurnal Ilmiah “MEKANIK” Teknik Mesin ITM, Vol. 2 2(2): 77–84.

Prabudiyanto, Topan. 2019. “Pengaruh Penambahan Unsur Magnesium (Mg) Terhadap Sifat Fisis Dan Mekanis Hasil Coran Crankcase Mesin Pemotong Rumput Berbahan ADC 12.” Journal of Mechanical Engineering Learning 9(1): 1–7.

Samlawi, Achmad Kusairi, and Rudi Siswanto. 2016. “Diktat Bahan Kuliah Material Teknik.” Universitas Lambung Mangkurat: 1–104.

Shomad, Muhammad Abdus, and Aulia Adam Jordianshah. 2020. “Pengaruh Penambahan Unsur Magnesium Pada Paduan Aluminium Dari Bahan Piston Bekas.” Teknoin 26(1): 75–82.

Sowiyk, Primayoga Hogantara et al. 2016. “Pengaruh Penambahan Unsur Timah (Sn) Terhadap Sifat Fisis Dan Mekanis Pada Material Bearing Berbahan Dasar Aluminium (Al) Hasil Pengecoran HPDC.” Jurnal Teknik Mesin Universitas Airlangga 4(3): 290–98.

Wicaksana, Arif, and Tahar Rachman. 2018. “Aluminium.” Angewandte Chemie International Edition, 6(11), 951–952. 3(1): 10–27. https://medium.com/@arifwicaksanaa/pengertian-use-case-a7e576e1b6bf.

Published

2024-12-05

How to Cite

Rigel, M., Murjito, M., & Mamungkas, M. I. (2024). Effect of magnesium addition in aluminum A1100 casting process on its hardness. Journal of Energy, Mechanical, Material, and Manufacturing Engineering, 9(1). Retrieved from https://ejournal.umm.ac.id/index.php/JEMMME/article/view/37794

Issue

Vol. 9 No. 1 (2024)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.