Study the durability of welding and performance of base metal of L. P. G. home cylindrical manufactured in Kurdistan region.

Authors

  • Yassin Mustafa Ahmed Sulaimani Polytechnic University
  • Hameed D. Lafta Sulaimani Polytechnic University
  • Azhin Abdullah Abdulrahman Sulaimani Polytechnic University

DOI:

https://doi.org/10.22219/jemmme.v4i2.9742

Keywords:

LPG, Welding Procedure Qualification Test, ASTM, ASME, ISO, BS 5045.

Abstract

Liquefied petroleum gas (propane or butane) is a colorless liquid which readily evaporates into a gas. It has no smell, although it will normally have an odor added to help detect leaks. Liquefied petroleum gas is stored and handled as a liquid when under pressure inside an LPG cylinder. Liquefied petroleum gas cylinders are subjected to various tests to ensure their compliance requirements as per standard. This research studies the durability of welding and performance of base metal of L. P. G. home cylindrical in Kurdistan region. The experiments were carried out on three types of LPG cylinder using in Kurdistan regions A, B, and C and an unformed plate. To carried out the samples and tests during the research we depending on the standard tests for LPG cylinders. Three samples are extracted from each of LPG cylinders and unformed plate for each of tensile test, Bending test and Hardness test according to ISO 6892-2016 and ASME standards from each type of LPG cylinders and from unformed plate to examine the mechanical properties. In addition, chemical compositions also were carried out. These values are compared with standard.

Downloads

Download data is not yet available.

References

Chandrakar, A. T. A. K. M. “Design and Analysis of a Composite Cylinder for the Storage of Liquefied Gases” International Journal for Scientific Research & Development, Vol. 5, Issue 03, 2017. [2] C. Sai Kiran and J. Sruthi, “Design and Finite Element Analysis of Domestic LPG Cylinder using ANSYS Workbench.” CVR Journal of Science and Technology, p. vol.14,97-101, 2018. [3] Mulla Niyamat, K.Bicha, “Design and Stress Analysis Of Pressure Vessel By Using ANSYS”, International Journal of Engineering Sciences & Research Technology, Vol.4, Issue 7, Pp.578-585, 2015. [4] Akula, Ramakrishna, Siddiqui A Nihal, and Sojan Lal P. "Review of Liquefied Petroleum Gas (LPG) Cylinder Life cycle." International Journal of Advanced Engineering Technology , Vol. IV, PP: 124-127, 2013. [5] Bhadur Shah Zafar Marg Manak Bhavan, “Hot rolled steel plate up to 6mm sheet and streep for the manufucture of low pressure liquifiable gas cylinders.” wrought steel products sectional comitte, pp. 1–8, 2008. [6] Nihal A. Siddiquia, Akula Ramakrishna, P. Sojan Lalc, “Review on Liquefied Petroleum Gas cylinder acceptance test as per Indian Standard, IS 3196 (Part 3): 2012.’’ International Journal of Advanced Engineering Technology, Vol. IV, Pp. 119-123, 2013. [7] S. L, Ramakrishna and Siddiqui, “Impact of sample preparation methods on impact of sample preparation methods on liquefied petroleum gas cylinder parent metal liquefied petroleum gas cylinder parent metal tensile.” Journal of Engineering Research and Studies, pp. 12–15, 2013. [8] F. J. Mahmud, K. M. Abdulrahman, H. J. Muhammed and B. A. H. Seed “The Influence of Annealing Temperature and Soaking Time on the Ductility of SG 255” Kurdistan Journal of Applied Research (KJAR), Volume 2 , Issue 3 , August 2017. [9] Y. Li, W. Fang, C. Lu, Z. Gao, X.Ma, W. Jin , Y. Ye and F. “Wang Microstructure and Mechanical Properties of 34CrMo4 Steel for Gas Cylinders Formed by Hot Drawing and Flow Forming” Materials,pp.1-14, 2019. [10] British Standard (BS5045: part 2:1978) Specification Standard for transportable gas containers. [11] ISO 6892: Metallic materials - Tensile testing Part 1: Method of test at room temperature 2016 [12] ASME Boiler and Pressure Vessel Code – IX, 2013. [13] ASTM 384: Test Method for Micro indentation Hardness of Materials, 2011. [14] AWS, Welding Handbook, Volume 1: Welding Technology, Eighth Edi. AWS, American Welding Society Inc, 1998.

Downloads

Published

2019-11-30

How to Cite

Ahmed, Y. M., Lafta, H. D., & Abdulrahman, A. A. (2019). Study the durability of welding and performance of base metal of L. P. G. home cylindrical manufactured in Kurdistan region. Journal of Energy, Mechanical, Material, and Manufacturing Engineering, 4(2), 91–100. https://doi.org/10.22219/jemmme.v4i2.9742

Issue

Vol. 4 No. 2 (2019)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.