Implementing Emergency Power Supply for Lighting and Sound System for a Mosque based on light and Movement Sensors

Agus Ulinuha; Rizky Dian Wicaksana

doi:10.22219/dedikasi.v17i1.12186

Authors

Agus Ulinuha Universitas Muhammadiyah Surakarta
Rizky Dian Wicaksana Universitas Muhammadiyah Surakarta

DOI:

https://doi.org/10.22219/dedikasi.v17i1.12186

Keywords:

Emergency Power Supply, Solar Photovoltaic, Automatic Transfer Switch

Abstract

Emergency power supply is necessary for a mosque particularly when prayer is happening while power cuts. The important devices required to remain alive at this event are lighting and sound system. For this purpose, a battery is needed to supply the devices and the lighting and movement sensors that used to control the emergency power supply. The battery is powered by a solar photovoltaic (PV) panel. The power supply switching between main power and battery is regulated by Automatic Transfer Switch. A 20 Ah, 12 Volt battery supplied by 50 WP solar PV panel is used to back up the power for 6 W LED light and sound system. The system is implemented on the Mosque of Al-Bakri, Mojosongo, City of Surakarta. Research purpose of implementing this system is to solve the problem of power cuts during worship. This research used survey and measurement methods. In conclusion of implementing this system the prayer may continue even the electricity went out.

Downloads

Download data is not yet available.

Author Biography

Agus Ulinuha, Universitas Muhammadiyah Surakarta

Agus Ulinuha is an academic staff at the Department of Electrical Engineering, Universitas Muhammadiyah Surakarta (UMS). He earned B.S. in Electrical Engineering from Diponegoro University, Indonesia, Master in Electrical Engineering, Gadjah Mada University, Indonesia, and PhD in Electrical engineering, Curtin University of Technology, Australia. He is also currently appointed as the Head of Research Office at the University he is currently working for. His research interests are power system optimization, power quality, intelligent optimization technique, renewable energy, and electric transportation system.

References

P. Stenzel, T. Kannengießer, L. Kotzur, P. Markewitz, M. Robinius, and D. Stolten, “Emergency power supply from photovoltaic battery systems in private households in case of a blackout – A scenario analysis,” Energy Procedia, vol. 155, pp. 165–178, Nov. 2018, doi: 10.1016/j.egypro.2018.11.058. [2] N. A. Czarnecki, “Transfer switch for automatically switching between alternative energy source and utility grid,” US9583942B2, Feb. 28, 2017. [3] I.-D. Deaconu, M. Stănculescu, A.-I. Chirilă, V. Năvrăpescu, and H. Andrei, “On Automatic Transfer Switch System Security,” in 2018 International Conference on Applied and Theoretical Electricity (ICATE), Oct. 2018, pp. 1–6, doi: 10.1109/ICATE.2018.8551369. [4] M. LokeshReddy, P. J. R. P. Kumar, S. A. M. Chandra, T. S. Babu, and N. Rajasekar, “Comparative study on charge controller techniques for solar PV system,” Energy Procedia, vol. 117, pp. 1070–1077, Jun. 2017, doi: 10.1016/j.egypro.2017.05.230. [5] K. Indrakoesoema, K. Handono, E. Sumarno, Kiswanta, and A. Sudirman, “Emergency Power Supply of Control Rod for RDE,” J. Phys.: Conf. Ser., vol. 1198, no. 5, p. 052005, Apr. 2019, doi: 10.1088/1742-6596/1198/5/052005. [6] H. Islam et al., “Performance evaluation of maximum power point tracking approaches and photovoltaic systems,” Energies, vol. 11, no. 2, Feb. 2018, doi: 10.3390/en11020365. [7] A. Bhattacharjee, H. Samanta, N. Banerjee, and H. Saha, “Development and validation of a real time flow control integrated MPPT charger for solar PV applications of vanadium redox flow battery,” Energy Conversion and Management, vol. 171, pp. 1449–1462, Sep. 2018, doi: 10.1016/j.enconman.2018.06.088. [8] D. Ouyang, Y. He, M. Chen, J. Liu, and J. Wang, “Experimental study on the thermal behaviors of lithium-ion batteries under discharge and overcharge conditions,” J Therm Anal Calorim, vol. 132, no. 1, pp. 65–75, Apr. 2018, doi: 10.1007/s10973-017-6888-x. [9] Y. Fernandes, A. Bry, and S. de Persis, “Identification and quantification of gases emitted during abuse tests by overcharge of a commercial Li-ion battery,” Journal of Power Sources, vol. 389, pp. 106–119, Jun. 2018, doi: 10.1016/j.jpowsour.2018.03.034. [10] K. Zeb et al., “A comprehensive review on inverter topologies and control strategies for grid connected photovoltaic system,” Renewable and Sustainable Energy Reviews, vol. 94, pp. 1120–1141, Oct. 2018, doi: 10.1016/j.rser.2018.06.053. [11] E. Hernández-Márquez, R. Silva-Ortigoza, J. R. García-Sánchez, M. Marcelino-Aranda, and G. Saldaña-González, “A DC/DC Buck-Boost Converter–Inverter–DC Motor System: Sensorless Passivity-Based Control,” IEEE Access, vol. 6, pp. 31486–31492, 2018, doi: 10.1109/ACCESS.2018.2846614. [12] L. H. Fang, R. B. Abd Rahim, M. Isa, S. I. Syed Hassan, and B. B. Ismail, “The Design of Operational Amplifier for Low Voltage and Low Current Sound Energy Harvesting System,” IOP Conf. Ser.: Mater. Sci. Eng., vol. 318, p. 012035, Mar. 2018, doi: 10.1088/1757-899X/318/1/012035. [13] A. Arshad, M. Rizwan, and A. Maqsood, “Design & Implementation of Cost Effective Automatic Transfer Switch,” vol. 4, no. 5, p. 10, 2016. [14] Y. Shi, B. Xu, Y. Tan, D. Kirschen, and B. Zhang, “Optimal Battery Control Under Cycle Aging Mechanisms in Pay for Performance Settings,” IEEE Transactions on Automatic Control, vol. 64, no. 6, pp. 2324–2339, Jun. 2019, doi: 10.1109/TAC.2018.2867507. [15] Q. Kellner, E. Hosseinzadeh, G. Chouchelamane, W. D. Widanage, and J. Marco, “Battery cycle life test development for high-performance electric vehicle applications,” Journal of Energy Storage, vol. 15, pp. 228–244, Feb. 2018, doi: 10.1016/j.est.2017.11.019. [16] P. Chaudhary and M. Rizwan, “Voltage regulation mitigation techniques in distribution system with high PV penetration: A review,” Renewable and Sustainable Energy Reviews, vol. 82, pp. 3279–3287, Feb. 2018, doi: 10.1016/j.rser.2017.10.017.