The Quality Control At Keripik Tempe Abadi Malang
DOI:
https://doi.org/10.22219/jamanika.v1i2.17075Keywords:
quality control, pareto chart, fishbone diagramAbstract
Changes in the industrial world such as the emergence of the Coronavirus have had a huge impact on companies because consumers are more selective in choosing good quality products for consumption. Quality is a very important factor for the survival of the company. Therefore, this research was conducted to apply quality control methods at the Company of Keripik Tempe Abadi in Malang City to improve the quality of their production. The tools used in this study are Seven tools and the table Failure Mode and Effect Analysis (FMEA). The results of this study indicate that there are product defects that exceed the tolerance limits of the company, namely in the form of deformities, broken products, burnt products, and defects in the packaging. Then based on the analysis with a Fishbone diagram to find out the root cause of product damage.
Downloads
References
Haming, M., & Nurnajamuddin, M. (2013). Manajemen Produksi Modern (2nd Ed.). Bumi Aksara.
Heizer, J., & Render, B. (2015). Operations Management (Manajemen Operasi), Ed. 11, Penerjemah: Dwi Anoegrah Wati S
Dan Indra Almahdy, Salemba Empat, Jakarta. Suryo Agung …. In Nucleic Acids Research.
Hidayatullah Elmas, M. S. (2017). Pengendalian Kualitas Dengan Menggunakan Metode Statistical Quality Control (Sqc) Untuk Meminimumkan Produk Gagal Pada Toko Roti Barokah Bakery. Wiga : Jurnal Penelitian Ilmu Ekonomi, 7(1), 15–22. Https://Doi.Org/10.30741/Wiga.V7i1.330
Idris, I., Sari, R. A., Wulandari, W., & U, W. (2016). Pengendalian Kualitas Tempe Dengan Metode Seven Tools. Teknovasi, 3(1), 66–80.
Junaidi, E., Probowati, B. D., & Fakhry, M. (2014). Pengendalian Mutu Pada Produksi Keripik Sukun There Are Many Matter Can Be Make Chips . One Of Them Is Breadfruits Chips . Consumers Need A Good Quality Of Product . The Industries Must Be Keep The Quality Of Its Products . Therefore It Is Necessary For A. Agrointek, 8(1), 13–22.
Kadek, N., & Sari, R. (2018). Analisis Pengendalian Kualitas Proses Produksi Pie Susu Pada Perusahaan Pie Susu Barong Di Kota Denpasar Fakultas Ekonomi Dan Bisnis , Universitas Udayana , Bali , Indonesia ABSTRAK Persaingan Di Dalam Industri Baik Jasa Maupun Manufaktur Tidak Hanya Dala. 7(3), 1566–1594.
Mcdermott, R. E., & Dkk. (2009). The Basic Of FMEA (2nd Ed.). CRC Press Taylor & Francis Group.
Musran Munizu, M. M. (2013). Total Quality Management (TQM) Practices Toward Product Quality Performance: Case At Food And Beverage Industry In Makassar, Indonesia. IOSR Journal Of Business And Management, 9(2), 55–61. Https://Doi.Org/10.9790/487x-0925561
Nasution, M. N. (2010). Manajemen Mutu Terpadu (Total Quality Management). Ghalia Indonesia.
Optimasi, D., Wahyono, H., & Akurat, F. (2018). Analysis Quality Control Of Batik Products. International Journal Of Scientific And Technology Research, 7(7), 52–56.
Riani, L. P. (2016). Analisis Pengendalian Kualitas Produk Tahu Putih ( Studi Kasus Pada Home Industri Tahu Kasih Di Kabupaten Trenggalek ). 14(1), 58–63.
Sugiyono, H. (2016). Metode Kualitatif Dan Kuantitatif. In Cetakan Ke-23. Alfabeta, Bandung.
Sugiyono, P. (2015). Metode Penelitian Kombinasi (Mixed Methods). Alfabeta.
Tanjong, S. D. (2013). Implementasi Pengendalian Kualitas Dengan Metode Statistik Pada Pabrik Spareparts Cv Victory Metallurgy Sidoarjo. 5(1), 1–12.
Widiatama, A. (2017). Pengendalian Kualitas Produk Cup Air Minum Dalam Kemasan 240 Ml Di PT. YZ. 14–19.
Windarti, T. (2014). Pengendalian Kualitas Untuk Meminimasi Produk Cacat Pada Proses Produksi Besi Beton. J@Ti Undip : Jurnal Teknik Industri, 9(3), 173–180.
