Development of video tutorials on building construction and utilities subjects assisted by Bandicam application for grade XI students at vocational high school

Authors

  • Hadi Suryono Civil Engineering and Planning Education, Engineering Faculty, Universitas Negeri Yogyakarta, Kampus Karang Malang Yogyakarta, Indonesia
  • Putu Sudira Doctoral Study Programme of Technology and Vocational Education, Postgraduate Program, Universitas Negeri Yogyakarta, Jl. Colombo No 1 Yogyakarta, Indonesia.

DOI:

https://doi.org/10.22219/jinop.v10i2.35576

Keywords:

4D, Bandicam, Learning Media

Abstract

The implementation of Building Construction and Utilities learning for class XI in Vocational High School (VHS) has faced several challenges including student understanding, teachers’ competency, and learning media. This study aims to result in a product, including the feasibility test and effectiveness on the topic of door and window frame details drawing assisted by the Bandicam application. We employed the Research and Development (R&D) model of 4D Thiagarajan. The trial was conducted on 14 students of the Building Information and Modeling Design (DPIB) expertise program class XI with input from 2 experts and 1 teacher. The data was collected through interviews, observations, and questionnaires. The obtained data was analysed using quantitative and qualitative descriptive analysis and descriptive statistics. The results show that the 4 video products were feasible and effective as seen from the improvement of student learning outcomes in the subject of building construction and utilities.

Downloads

Download data is not yet available.

References

Cahyono, Heri. 2021. “Penggunaan Video Pembelajaran Berbasis Aplikasi Bandicam Pada Mata Kuliah Teori Graf Untuk Meningkatkan Kemampuan Abstraksi Mahasiswa.” Jurnal Pendidikan Modern 6(2):114–19. https://doi.org/10.37471/jpm.v6i2.205.

Dahliya, Liya, Suparman Suparman, and Imam Yuliadi. 2022. “Pengaruh Penerapan Media Video Tutorial Terhadap Hasil Belajar Peserta Didik Dalam Mata Diklat Konstruksi Dan Utilitas Gedung.” JUPE : Jurnal Pendidikan Mandala 7(4):933–42. https://doi.org/10.58258/jupe.v7i4.4354.

Elmunsyah, Hakkun, and Muhammad Rizza. 2018. “The Effect of Laboratory Facilities and Teacher Competence on Student Learning Outcomes in Vocational High School (VHS).” Letters in Information Technology Education (LITE) 1(1):18–21. https://doi.org/10.17977/um010v1i12018p018.

Farhan, Muhammad, and Indiah Kustini. 2019. “Penerapan Model Pembelajaran Langsung (MPL) Dengan Menggunakan Media Miniatur Pada Materi Menggambar Detail Pintu Di VHS Negeri Kudu.” Jurnal Kajian Pendidikan Teknik Bangunan 5(1):1–8.

Febianto, Alfi. 2023. “Perbedaan Hasil Belajar Siswa Antara Media Pembelajaran Video Animasi 3D Sketchup Dan Tanpa Media Pada Mata Pelajaran Aplikasi Perangkat Lunak Dan Perancangan Interior Gedung Kelas XI DPIB VHS 7 Surabaya.” Jurnal Kajian Pendidikan Teknik Bangunan (JKPTB) 9(1):13–20.

Fikri, Hasnul &. Ade Sri Madona. 2018. Pengembangan Media Pembelajaran Berbasis Multimedia Interaktif. I. edited by Hendrizal. Bantul: Penerbit Samudra Biru.

Gunawan, Muhammad Lutfi. 2019. “Penerapan Model Pembelajaran Problem Based Learning Menggunakan Media Maket Pada Mata Pelajaran Menggambar Konstruksi Kusen Pintu Dan Jendela Kelas X1 Dpib VHS Negeri 2 Surabaya.” Jurnal Kajian Pendidikan Teknik Bangunan 5(1).

Hakim, Arif Rahman, Nur Iva Wulansari, and Setyo Admoko. 2022. “Optimizing Bandicam in the Making of Video Presentations For Interactive Static Fluid Materials.” Jurnal Pendidikan Fisika Dan Teknologi 8(1):16–22. https://doi.org/10.29303/jpft.v8i1.3462.

Hapsari, W. S. .. 2022. “Upaya Peningkatan Pemahama Materi AutoCAD Melalui Pembelajaran Menggunakan Modul Bergambar Pada Siswa Kelas XII DPIB-1 VHS Negeri 3 Boyolangu Semester 1 Tahun Pelajaran 2022/2023.” Jurnal Pendidik Profesional Mandiri II(4):8–12.

Hasan, M. 2021. Media Pembelajaran. edited by F. Sukmawati. Klaten: Penerbit Tahta Media Utama.

Herayanti. L, Safitri. B. R. .. 2019. “Pembelajaran Mendesain Rumah Menggunakan Media Audio Visual Dengan Memanfaatkan Bandicam.” Pembelajaran Mendesain Rumah Menggunakan Media Audio Visual Dengan Memanfaatkan Bandicam 5(2):305–9. http://dx.doi.org/10.29303/jpft.v5i2.1429.

Hikmawati, Fenti. 2020. Metodologi Penelitian. 1 Cetakan. Depok: PT. RAJAGRAFINDO PERSADA.

Indra. 2022. “Bandicam ! Recorder Low Budget Dengan Kualitas Video High Quality.” Retrieved https://idmetafora.com/news/read/1259/Bandicam-Recorder-Low-Budget-dengan-Kualitas-Video-High-Quality.html.

Junaidi. 2019. “Peran Media Pembelajaran Dalam Proses Belajar Mengajar.” 3(1):45–56. doi: https://doi.org/10.35446/diklatreview.v3i1.349.

Khotimah, K., and F. Hasanah. 2021. “Penerapan Media Bandicam Dengan Pendekatan Realistik Untuk Meningkatkan Hasil Belajar Siswa Pada Pelajaran PAI Kelas XI IPS Di SMA Negeri Plandaan Jombang.” JoEMS (Journal of Education and … 4(4):29–36.

Kristanto, A. 2016. Media Pembelajaran. Edited by -. Surabaya: Penerbit Bintang Surabaya.

Muh Judrah. 2019. “Konsep Pembelajaran Tuntas.” Jurnal Pendidikan Dasar Dan Keguruan 4(1):33–38. https://doi.org/10.47435/jpdk.v4i1.92.

Nabila, Ami Putri. 2022. “Pengembangan Media Pembelajaran Video Tutorial Dengan Aplikasi Adobe Premiere Pro Pada Mata Pelajaran Mekanika Teknik.” Applied Science In Civil Engineering 3(4):351–55.

Nurdiansyah. 2019. Media Pembelajaran Inovatif. Sidoarjo: Umsida Press.

Rifandi, Ronal, Defri Ahmad, and Meria Ultra Gusteti. 2020. “Praktikalitas Media Video Tutorial Sebagai Suplemen Digital Learning Pada Mata Kuliah Persamaan Diferensial Biasa.” Jurnal Eksakta Pendidikan (Jep) 4(1):27. https://doi.org/10.24036/jep/vol4-iss1/436.

Rizqiyana, Aula, Mohammad Fatkhurrokhman, and Mustofa Abi Hamid. 2023. “Strategi Guru Dalam Proses Pembelajaran Praktik Mata Pelajaran Produktif Di Sekolah Menengah Kejuruan.” Journal on Education 6(1):7797–7811.

Sapriyah. 2019. “Media Pembelajaran Dalam Proses Belajar Mengajar.” Prosiding Seminar Nasional Pendidikan FKIP UNTIRTA 2(1):470–77. https://doi.org/10.35446/diklatreview.v3i1.349.

Sugiyono. 2021. Metode Penelitian Pendidikan (Kuantitatif, Kualitatif, Kombinasi, R&D Dan Penelitian Pendidikan). Ketiga. edited by A. Nuryanto. Bandung.

Sungkar Lutfiah, Arthur Riyan dkk. 2023. “Pengembangan E-Modul Konstruksi Dan Utilitas Gedung Berbasis Proyek Pada Kompetensi Keahlian Desain Pemodelan Dan Informasi Bangunan (DPIB) Di VHS Lutfiah.” Jurnal Pendidikan Teknik Bangunan 3(1):33–54.

Syafriadi, Widhiastuti Rahayu dkk. 2023. Gambar Teknik 1. Vol. Pertama. edited by H. Rasidi. bandung: Widina Media Utama.

Tarial, Tarial, Suratno Suratno, and Ali Idrus. 2022. “Pengembangan Media Pembelajaran Konstruksi Dan Utilitas Gedung Berbantuan Sketchup 3D Untuk Kompetensi Keahlian Desain Pemodelan Dan Informasi Bangunan VHS.” Jurnal Manajemen Pendidikan Dan Ilmu Sosial 3(2):829–40. https://doi.org/10.38035/jmpis.v3i2.1173.

Triaghosa, Egi, Heri Suryaman, and Wahyu Cahyaka. 2022. “Pengembangan Media Pembelajaran Konstruksi Dan Utilitas Gedung Berbasis Animasi Power Point Materi Instalasi Listrik.” Jpts IV(2):153–67.

Wijaya, Kinanti, Sutrisno Sutrisno, Nono Sebayang, and Harvan Ardiansyah. 2023. “Development Of Video Tutorials AutoCAD Learning in Software Applications and Building Interior Design Lessons With 4d Development Model.” in Proceedings of the 4th Annual Conference of Engineering and Implementation on Vocational Education, ACEIVE 2022, 20 October 2022, Medan, North Sumatra, Indonesia.

Yahya, Muhammad, Wahyudi, and Akmal Hidayat. 2023. “Optimizing Teaching Tools: Pelatihan Jobsheet Untuk Meningkatkan Kualitas Pembelajaran Di VHS Produktif Provinsi Sulawesi Barat.” Vokatek : Jurnal Pengabdian Masyarakat 1(3):227–34. https://doi.org/10.61255/vokatekjpm.v1i3.194.

Published

11/18/2024

How to Cite

Suryono, H., & Sudira, P. (2024). Development of video tutorials on building construction and utilities subjects assisted by Bandicam application for grade XI students at vocational high school. JINoP (Jurnal Inovasi Pembelajaran), 10(2), 222–237. https://doi.org/10.22219/jinop.v10i2.35576

Issue

Vol. 10 No. 2 (2024): November

Section

Articles

License

Copyright (c) 2024 Suryono et al

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright Notice

Authors who publish with JINoP (Jurnal Inoasi Pembelajaran) agree to the following terms:

  1. For all articles published in the JINoP (Jurnal Inovasi Pembelajaran), copyright is retained by the authors. Authors give permission to the publisher to announce the work with conditions. When the manuscript is accepted for publication, the authors agree to the automatic transfer of the publishing right to the publisher.
  2. Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License. that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).