Perancangan Mesin Bubut Kayu 3 Jaw Spindel
Keywords:
wood, waste, lathe, products, cnc machine, technologyAbstract
So far, the utilization of wood waste has not been good, it even has a very low economic value because wood waste is only used as firewood for making bricks. Meanwhile, this wood waste can be utilized and processed into several products that have high economic value, such as the manufacture of billiard sticks, bird cages, accessories, and furniture products. To process wood waste manually takes a lot of time and effort, therefore the right solution is to use a wood lathe. A wood lathe is a machine tool used to cut rotating workpieces. The slight difference between a wood lathe and a conventional lathe is the material used. The design of a wood lathe is intended to minimize time, effort and increase the economic value of a material so that it becomes a better product. For the development of wood lathes, you can incorporate CNC technology into the machine. A lathe with CNC is a machine that is operated using a numeric code so the machine will move automatically following the program. If using CNC technology, it will increase costs for purchasing CNC machines and training ecommere systems for the community.
Keywords: Wood Waste Products, Wood Lathes, CNC Machine Technology
Downloads
References
B. B. Falk, “Opportunities For The Woodwaste Resource,” For. Prod. J., Vol. 47, No. 6, Pp. 17–22, 1994.
M. Jawad, R. Schoop, A. Suter, P. Klein, And R. Eccles, “Perfil De Eficacia Y Seguridad De Echinacea Purpurea En La Prevención De Episodios De Resfriado Común: Estudio Clínico Aleatorizado, Doble Ciego Y Controlado Con Placebo,” Rev. Fitoter., Vol. 13, No. 2, Pp. 125–135, 2013, Doi: 10.1002/Jsfa.
T. Lihra, U. Buehlmann, And R. Beauregard, “Mass Customisation Of Wood Furniture As A Competitive Strategy,” Int. J. Mass Cust., Vol. 2, No. 3/4, P. 200, 2008, Doi: 10.1504/Ijmassc.2008.017140.
G. M. Allenby, J. D. Brazell, J. R. Howell, And P. E. Rossi, “Economic Valuation Of Product Features,” Quant. Mark. Econ., Vol. 12, No. 4, Pp. 421–456, 2014, Doi: 10.1007/S11129-014-9150-X.
G. Bucăţa And A. M. Rizescu, “The Role Of Communication In Enhancing Work Effectiveness Of An Organization,” L. Forces Acad. Rev., Vol. 22, No. 1, Pp. 49–57, 2017, Doi: 10.1515/Raft-2017-0008.
P. Diwan And A. Singh, “Numerical Analysis Of Wood Lathe,” Pp. 217–227, 2015.
P. C. Cioni, G. Flamini, And I. Morelli, “Zyxwvu Zyx,” Vol. 10, Pp. 5–8, 1996.
J. Mayr Et Al., “Thermal Issues In Machine Tools,” Cirp Ann. - Manuf. Technol., Vol. 61, No. 2, Pp. 771–791, 2012, Doi: 10.1016/J.Cirp.2012.05.008.
M. Dewi, A. Nurohmah, And N. S. Rahayu, “Pemberdayaan Perempuan Melalui Usaha Batik Tulis: Sebuah Pengalaman Dari Pelaksanaan Program Iptek Bagi Masyarakat (Ibm) Di Kabupaten Sleman …,” J. Abdimas Musi …, Vol. 2, No. 2, Pp. 24–35, 2018, [Online]. Available: Https://Journal.Ukmc.Ac.Id/Index.Php/Jpm/Article/View/321%0ahttps://Journal.Ukmc.Ac.Id/Index.Php/Jpm/Article/Download/321/316.
S. Jusoh And H. M. Al-Fawareh, “Natural Language Interface For Online Sales Systems,” 2007 Int. Conf. Intell. Adv. Syst. Icias 2007, Pp. 224–228, 2007, Doi: 10.1109/Icias.2007.4658379.
P. C. Tseng And J. L. Ho, “A Study Of High-Precision Cnc Lathe Thermal Errors And Compensation,” Int. J. Adv. Manuf. Technol., Vol. 19, No. 11, Pp. 850–858, 2002, Doi: 10.1007/S001700200096.
S. Sulova, “A System For E-Commerce Website Evaluation,” Int. Multidiscip. Sci. Geoconference Surv. Geol. Min. Ecol. Manag. Sgem, Vol. 19, No. 2.1, Pp. 25–32, 2019, Doi: 10.5593/Sgem2019/2.1/S07.004.
S. T. Newman Et Al., “Strategic Advantages Of Interoperability For Global Manufacturing Using Cnc Technology,” Robot. Comput. Integr. Manuf., Vol. 24, No. 6, Pp. 699–708, 2008, Doi: 10.1016/J.Rcim.2008.03.002.
Z. Hutyrová, J. Ščučka, S. Hloch, P. Hlaváček, And M. Zeleňák, “Turning Of Wood Plastic Composites By Water Jet And Abrasive Water Jet,” Int. J. Adv. Manuf. Technol., Vol. 84, No. 5–8, Pp. 1615–1623, 2016, Doi: 10.1007/S00170-015-7831-6.
E. A. Salca And S. Hiziroglu, “Evaluation Of Hardness And Surface Quality Of Different Wood Species As Function Of Heat Treatment,” Mater. Des., Vol. 62, No. August 2018, Pp. 416–423, 2014, Doi: 10.1016/J.Matdes.2014.05.029.
B. H. River, C. B. Vick, And R. H. Gillespie, “Wood As An Adherend,” Treatise Adhes. Adhes., Vol. 7, Pp. 1–23, 1991, [Online]. Available: Http://Www.Fpl.Fs.Fed.Us/Documnts/Pdf1991/River91a.Pdf.
Anonymous, “Mengukur Tingkat Kekasaran Kayu Dengan Menggunakan Mesin Frais.”
Mardiyanto, “Jurusan Teknik Mesin Fakultas Teknik Universitas Muhammadiyah Surakarta 2008,” Ilusi Senja, P. 31, 2008.
I. B. Sulistyono, Y. Suherlan, And S. Mataram, “Diversifikasi Produk Limbah Kayu Sebagai,” Senadimas Unisri, Vol. 5, No. 3, Pp. 283–288, 2019.
Anonymous, “Perancangan Mesin Bubut Kayu,” アジア経済.
S. Sudarman, W. Guszolil, D. Daryono, And M. Lukman, “Feasibility Study On A Micro Hydro Power Plant At Coban Jahe Waterfall, Jabung, Malang Regency,” J. Energy Mech. Mater. Manuf. Eng., Vol. 6, No. 1, Pp. 41–52, 2021, Doi: 10.22219/Jemmme.V6i1.16433.
A. Fauzan, H. Soegiharto, A. Mokhtar, S. Adiwidodo, E. Faculty, And U. M. Malang, “The Role Of Flue Gas Inhibitor On Stabilizing Heptane Flame In Mesoscale Combustor,” Vol. 6, No. 2, Pp. 111–118, 2021.
W. Rowe John, “Vertical Axis Wind Turbine,” Us 20040036297al, 2004.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Irfan Maulana Nur Alfinas, Andinusa Rahmandhika, Budiono
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
