PERILAKU LEKATAN TULANGAN POLOS DAN TULANGAN ULIR PADA STRUKTUR BETON SERAT KAYU
Fakultas Teknik Jurusan Teknik Sipil Universitas Muhammadiyah Malang
Alamat Korespondensi : Jl. Raya Tlogomas 246 Malang 65144, Indonesia
In addition wood powder residual sawmill.the concrete will cause a change in behavior
juxtaposition between concrete and reinforcement steel reinforcement material either plain or
reinforcement thread.The research this studyFiber is used sawmill waste wood fiber with content
0%, 0.5%, 1% and 1.5% of the volume of concrete as a comparison is also made of concrete
Specimens used were silinder30 cm x 15 cm were 12 specimens for compressive strength
testing and 24 specimens for testing strong adhesion. By using reinforcement thread diameter D
10mm and 10 mm reinforcment glace.
From the research of the study isstudy iscompressive strengthwith a mixture of sawdustdeclines
with the powder in each variation the capability of strong stickbetween reinforcing steel and concrete
plain wood fiber and strong adhesion between reinforcment glace stee land concrete screw wood
fiber show that the strong ability adhesion reinforcment thread more thanreinforcment glace.While
more of fibers in the concrete mix variation, the lower the magnitude of the strong adhesion between
the concrete and reinforcement plain tacky.
Keywords : Concrete, sawdust, compressive strength ,strong adhesive
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
MEDIA TEKNIK SIPIL Journal
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.