PENGARUH PENGGUNAAN SERAT HIGH DENSITY POLYETHYLENE (HDPE) PADA CAMPURAN BETON TERHADAP KUAT TARIK BETON
DOI:
https://doi.org/10.22219/jmts.v12i1.2038Abstract
PENGARUH PENGGUNAAN SERAT HIGH DENSITY
POLYETHYLENE (HDPE) PADA CAMPURAN BETON TERHADAP
KUAT TARIK BETON
1)Erwin Rommel, 2)Yunan Rusdianto, 3)Anita Kurniati
1,2,3)Jurusan Teknik Sipil Fakultas Teknik Universitas Muhammadiyah Malang
3)Alumni Teknik Sipil FT-UMM
email : erwin67pro@yahoo.com
ABSTRACT
Research on the addition of HDPE fibers in normal concrete is intended to determine the
relationship between the percentage of variation of fiber addition of HDPE to the workability, tensile
strength and determine the pattern of deployment of fiber in concrete. The addition of HDPE fibers
is intended to increase the tensile strength of concrete.
The concrete was mixed using gresik cement type PPC, sand with the gradation limits zone 2,
the gravel with a maximum grain size of 20 mm, and HDPE fibers with a width of 0.5 cm and 2.5
cm long. Variations in the addition of HDPE fibers are 0%, 1%, 2%, 3%, 4%, 5%, 6%, 7%, 8%,
9%, 10% of the volume of the mixture. Tensile strength testing performed with a cylindrical test
piece with a diameter of 150 mm and 300 mm height at the age of 28 days of the test object. Tensile
strength of concrete data analysis using regression analysis.
The results showed that the addition of HDPE fibers can increase the value of tensile strength
sides. There is a strong pull on the sides of the optimum levels of 4% with a tensile strength of 2.86
MPa increased by 18%
Key words: Concrete, HDPE fibers, Tensile strength
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Erwin Rommel, Yunan Rusdianto, Anita Kurniati
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
MEDIA TEKNIK SIPIL Journal
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.