CYCLIC BEHAVIOUR OF LIGHTLY REINFORCED CONCRETE COLUMNS WITH NON-DUCTILE LAP SPLICES
DOI:
https://doi.org/10.22219/jmts.v16i1.5110Keywords:
drift capacity, lateral load capacity, lap splice location, low longitudinal reinforcement ratio, poor confinement, reinforced concrete columnAbstract
Experimental testing of lightly reinforced concrete column was conducted to investigate the collapse behavior of such column under cyclic lateral loading. Six column specimens, which have low longitudinal reinforcement and lack of confinement, were detailed with no lap splice, and non-ductile lap splice within or outside critical region. Placing the short, unconfined column's lap splice within critical region caused peak moment to fall short under its nominal moment capacity. In contrast, moment capacity of the specimen containing non-ductile lap splice outside critical region was in close agreement with those of specimen without lap splice. However, its inelastic damage region was moving away from the beam-column interface, resulted in degradation of drift capacity and rapid degradation of lateral strength. The presence of non-ductile lap splice outside critical region also potentially shift column's collapse mechanism from flexure to flexure-shear critical. The ability of lightly reinforced concrete columns to maintain its axial load carrying capacity to large drift ratios despite heavy damage and significant loss of lateral load carrying capacity indicates that lap splice failure does not create sudden collapse hazard.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Rizki Amalia Tri Cahyani, Ari Wibowo, Wisnumurti Wisnumurti
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
MEDIA TEKNIK SIPIL Journal
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.