KARAKTERISTIK FISIK KIMIA KITOSAN DARI CANGKANG RAJUNGAN (Portunus pelagius) MELALUI PROSES DEASETILASI DENGAN KONSENTRASI NaOH DAN WAKTU EKSTRAKSI SERTA DI APLIKASIKAN SEBAGAI BAHAN PENGAWET ALAMI PADA FILLET IKAN NILA
DOI:
https://doi.org/10.22219/fths.v2i1.12972Keywords:
Chitosan, Crab waste, Deacetylation, Food preservative, Tilapia fish filletAbstract
This research is done by 2 stages of making chitosan and applying on tilapia fish fillet. Objectives at stage 1 to determine the optimization of the difference in NaOH concentration (20%, 30%, 40%, and 50%) and time (30 minutes and 45 minutes) deacetylation extraction. while the objective at stage 2 to find out the effect of the difference of chitosan addition to natural preservative of tilapia fillet (0,5,5%, 1%, 1,5%, and 2%). Chitosan tests were performed on physicochemical properties (moisture content, ash content, protein content, solubility, viscosity, yield, and deacetylation degree) and fish fillet test (organoleptic and total plate count (TPC). The results showed that different concentrations of NaOH and extraction time deacetylation very significant effect on ash content, protein content, viscosity, solubility, degree of deacetylation, and yield. While the concentration of chitosan is applied to meat Tilapia fish fillet very significant effect on the preservation of the storage period. The best treatment in stage 1 is K3A2.
Downloads
References
De Garmo, E, P, 1998. Ekonomi Teknik. Erlangga. Jakarta
Departemen Kelautan dan Perikanan. 2000. Statistik Data Perikanan. Jakarta:
Departemen Kelautan dan Perikanan.
Estiasih, Teti dan Kgs Ahmadi, 2009. Teknologi Pengolahan Pangan. Bumi
Aksara. Malang.
Gustini, Siti K, Ari HY. 2014. Kualitas ikan kembung (Rastrelliger kanagurta)
setelah perendaman dalam kitosan ditinjau dari aspek mikrobiologi dan
organoleptik. Protobiont 3(2): 100-105.
Harianingsih, 2010. Pemanfaatan Limbah Cangkang Kepiting menjadi Kitosan
Sebagai Bahan Pelapis (coater) pada buah Stroberi. Program Magister
Teknik Kimia UNDIP : Semarang.
Johnson EL, Peniston QP. 1982. Utilization of shellfish wastes for production of
chitin and chitosan. Chemistry and Biochemistry of Marine Food Product.
The AVI. Connecticut
Karmas, E., 1982. Poultry and Seafood Technology, Noyes Data Corporation,
USA.
Kumar, MNR. 2000. A Review of chitin and chitosan Application. J. Reac and
Func Poly. 46: 1-27
Kurniasih, M. 2011. Sintesis dan Karakterisasi Fisika-Kimia Kitosan (Synthesis
And Physicochemical Characterization Of Chitosan). Jurnal Inovasi Vol.5
No. 1, Januari 2011: 42-48.
Mima, S., Miya M., Iwamoto R., Yoshikawa, S. 1983. Journal Apllication Polymer
dalam Hong, K. N, Samuel P. M. 1989. Preparation of Chitin and Chitosan.
Department of Food Science and Technology, Catholic University. Korea
Utara.
Bastaman S. 1989. Studies on degradation and extraction of chitin and chitosan
from prawn shells [disertation]. Dept Mechanical Manufacturing,
Aeronautical and Chemical Engineering. Queen’s Univ. Belfast.
Rochima E. 2005. Aplikasi kitin deasetilase termostabil dari Bacillus
papandayan K29-14 asal Kawah Kamojang Jawa Barat pada pembuatan
kitosan [tesis]. Bogor: Program Pascasarjana, IPB.
Siska J, Mirna I, Desmelati. 2012. Pengaruh penggunaan minuman berkarbonasi
untuk menghambat kemunduran mutu ikan gurami (Osphronemus
gouramy) pada suhu kamar. Jurnal Perikanan dan Kelautan 17(2): 71-87.
Zheng, Lian Ying dan Zhu, Jiang Feng, 2003. Study on Antimicrobial Activity of
Chitosan With Different Molecular Weights. Journal Carbohydrate
Polimers, 54(4), 527-530,.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).