Kajian Edible Coating Berbasis Kolang-Kaling dengan Penambahan Bahan Pengental dari Sumber Alami (Pati dan Pektin) dan Sintetis (CMC) yang Diaplikasikan pada Dodol
DOI:
https://doi.org/10.22219/fths.v3i1.13056Keywords:
CMC, dodol, edible coating, pectin, thickening, starchAbstract
The purpose of this study was to determine the effect of the type of thickener on the quality of edible coatings, the effect of the concentration of thickener types on the quality of edible coatings applied to dodol, and find the best treatment of edible coatings that can increase the shelf life of dodol. The research was arranged in a Nested Randomized Design method consisting of two factors. First factor that became the nest was a variation of thickener (P) with treatment level (Pati, Pectin, and CMC) and second factor that became nested namely variation of thickener concentration (K) with treatment level (1%, 1.5%, and 2% ). The results showed that the addition of pectin 2% as the best treatment has a viscosity of 238.2 cP and the ability to protect dodol on the 6th-day storage can be observed at a water content of 26.98% which is close to SNI which is equal to 20%, TPC (Total Plate Count) 4.9 × 104Cfu / g which is close to the TPC number on SNI of 1 × 104Cfu / g, FFA (Free Fatty Acid) of 1.06% which does not exceed the SNI limit of 10.5%, the texture of 8.18 N / mm, the aroma score of 3.53 is a bit rancid, the appearance score is 5.23 which means neutral and the preferences score is 6.07 which means a little like.
Downloads
References
Amaliya, R.R. & W.D.R. Putri. 2014. Karakteristik Edible Film dari Pati
Jagung dengan Penambahan Filtrat Kunyit Putih sebagai Antibakteri.
Jurnal Pangan dan Agroindustri; 2(3):4353.Semarang.
Ann-Charlott Eliasson. 2004. Starch in Food. Woodhead Publishing Limited
Cambridge. England.
Badan Pusat Statistik. 2013. Kabupaten Lima Puluh Kota dalam Angka 2013.
Sarilamak.
Badan Standarisasi Nasional. 2013. SNI 01-2986-2013. Dodol Beras Ketan.
Badan Standarisasi Nasional. Jakarta.
Bird, T., 2000. Kimia Fisik untuk Universitas, Terjemahan: K. I. Tjeen., PT
Gramedia, Jakarta.
Bourtoom, 2007. Pengaruh Jenis Plasticizer Terhadap Sifat Fisik dan Mekanik
Plastik Biodegradable (terjemah). Universitas Gajah Madah.
Chaplin, M.Fand C. Bucke. 2004. Enzyme Technology. Cambridge University
Press, Cambridge, 378-380. Great Britain.
De Garmo, E.P.W.G. Sullivan dan J.R. Canada. 1984. Engineering Economy The
th Edition. Macmillan Publishing Comp., New York.
Direktorat Pengolahan Pangan Hasil Pertanian. 2005. Pengembangan Usaha
Pengolahan Tepung Tapioka. Departemen Pertanian, Jakarta.
Fortez, L.C.B., K.K. Ramos, T.C.Sivi dan F.P.C. Queiroz. 2011. Biodegradable
Edible Film from Renewable Sources- Potential for Their Application in
Fried Foods. American Journal of Food Technology. 6(7).USA.
Fuadi,F. 2011 . Ekstraksi Pektin dari Kulit Pisang Kepok dengan Pelarut Asam
Klorida. Jurnal Teknik Kimia No. 5, Vol. 17.
Goldberg, David E.2004. Kimia Untuk Pemula. Erlangga. Jakarta.
Guichard, E. S., A, Issanchou., Descovieres dan P. Etievant. 2000. Pectin
Concentration, Molekular Weight and Degree of Esterification. Influence
on Volatile Composition and Sensory Caracteristic of Strawberry Jam. J.
Food Science, 56:1621.USA.
Konservasi Lahan Kering. 3(2):21- 23.Jakarta.
Khofifah, I. 2012. Pemanfaatan Natrium Alginat sebagai Edible Coating untuk
Menghambat Kemunduran Mutu Ikan Bandeng (Chanos chanos Forsk)
Asap Selama Penyimpanan Suhu Ruang. Skripsi. Universitas
Diponegoro, Semarang.
Krochta, J. M. dan De Mulder- Johnston, C. 1997. Edible and biodegradable
polymer films: challenges and opportunities. J. Food Tech 51: 61-73.
Laili, Riskalatul.2019. Kajian Penambahan Ekstrak Kayu manis, Sakarin dan
Aspartam pada Edible Film Pati Singkong dan Substitusi Rumput Laut
(Euchema cottoni). Teknologi Pangan. Fakultas Pertanian-
Peternakan.UMM.Malang.
Meyer, H., 2000. Food Chemistry. Reinhold Publishing Corporation.New York.
Musaddad, D,. dan Hartuti, N,. 2003. Produk Olahan Tomat, seri agribisnis.
Penebar Swadaya, Jakarta.
Sitompul, K. 2017. Sifat Fisik Edible Film Kolang Kaling. Jurnal Pangan dan
Agroindustri Vol.5 No.1:13-25. Jakarta.
Skurtys, O., C. Acevedo, F. Pedreschi, J. Enrions, F. Osorio, dan J.M. Aquilera.
Food hydrocolloid edible films and coating. Journal of Food Research
International, 39: 840-646.
Suryani. 2015. Modifikasi Pati Singkong. Pada Proses Pembuatan Marshmallow.
Jurnal Pangan dan Agroindustri Vol. 3 No 2 p.723-733. Jakarta.
Syarifuddin, A., 2015, Karakteristik Edible Film dari Pektin Albedo Jeruk Bali
dan Pati Garut. Universitas Brawijaya.Malang.
Taggart, P. 2004. Starch as an ingredients : manufacture and applications. Di
dalam: Ann Charlotte Eliasson (ed). Starch in Food: Structure,
Function,and Application. CRC Press, Baco Raton, Florida.
Tarigan, J, dan Gaban, J.2009. Analisa Thermal dan Komponen Kimia Kolang-
Kaling. Jurnal Biologi Sumatra.4:1.
Tazwir, D. L. Ayudiarti, dan Suryanti. 2010. Pengaruh Penggunaan Asam
Klorida Terhadap Mutu Gelatin Tulang Ikan Kakap Putih (Lates
calcarifer). Jakarta.
Wijandi, S. 1976. Ilmu Pengetahuan Bahan Umbi- umbian. Departemen
Teknologi Hasil Pertanian. Institut Pertanian Bogor.Bogor.
Winarno, F.G. 2008. Kimia Pangan dan Gizi: Edisi Terbaru. Gramedia. Pustaka
Utama. Jakarta.
Wong. D.W.S., W.M. Camirand and A.E. Paulath. 1994. Development of Edible
Penyalut For Minimally Processed Fruit and Vegetables, Di Dalam:
Krochta Et Al. (Ed).Edible Penyaluts and Films To Improve Food
Quality.Technomic Publ Co. Inc. Lancaster-Basel. Pennsylvania. USA.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
