Evaluasi Kesiapan Dan Penerimaan Pengguna Sistem Informasi Management Tugas Akhir (SIMTEKNIK) Menggunakan Metode TRAM (Technology Readiness Acceptance Model)

Main Article Content

Lailatul Hasanah
Evi Dwi Wahyuni
Wildan Suharso

Abstract

SIMTEKNIK is an information system used by students of the Faculty of Engineering of the poor university of Muhammadiyah University which is usually used for activities related to the demands of the final project or thesis. SIMTEKNIK itself is a new information system that is used so that where there are found a number of system-related problems such as interface the existingthat is not yetenough friendly, and is less comfortable with the display of color writing to the system design, difficulty finding multiple menus when first used up to the waiting time when uploading files including long. Based on these problems, it is necessary to do an analysis to find out how user acceptance and readiness of SIMTEKNIK. Analysis of user readiness and acceptance needs to be done because the first step that must be done in implementing technology is knowing the user's readiness in accepting the technology. As for the model used in this study is the TRAM method (Technology Readiness Acceptance Model) The TRAM method is a combination of the Technology Readiness Index and the Technology Acceptance Model that was first proposed by Lin et al in 2005. The results found that from 9 hypotheses there were 5 hypotheses that were accepted and 4 others were rejected. accepted hypothesis namely, OPT-> PEU, INN-> PEU, DIS-> PU, DIS-> PEU and PEU-> PU .

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
L. Hasanah, E. D. Wahyuni, and W. Suharso, “Evaluasi Kesiapan Dan Penerimaan Pengguna Sistem Informasi Management Tugas Akhir (SIMTEKNIK) Menggunakan Metode TRAM (Technology Readiness Acceptance Model)”, JR, vol. 2, no. 7, Jan. 2024.
Section
Articles

References

E. Wulansari, “Perancangan Sistem Informasi ManajemenTugas Akhir Berbasis Web Jurusan Teknik Sipil Fakultas TeknikUniversitasTanjungpura.”

Rozandy, R. A., Santoso, I., Putri, S. A., Jurusan, A., Industri, T., ... Brawijaya, U. (n.d.). Analisis Variabel –Variabel Yang Mempengaruhi Tingkat Adopsi Teknologi Dengan Metode Partial Least Square (Studi Kasus Pada Sentra IndustriTahu DesaSendang, Kec. Banyakan, Kediri).1(3).

K. Osborn and B. L. White, “Analisis Faktor Optimalisasi Golden Age Anak Usia,” vol. 4, no. 1, pp. 48–56,2018.

A. S. Hussein, “Penelitian Bisnis dan Menejemen Menggunakan Partial Least Sqares(PLS) dengan smartPLS 3.0,” Clinical Orthodonticsand Research,vol. 2, no.2.pp.49-52, 2015.

A, Nina Eka 2019. Evaluasi Pengaruh Kesiapan Pengguna Terhadap Penerimaan Dapodik Menggunakan Metode Tram (Technology Readinness Acceptance Model). Skripsi. Malang: Universitas MuhammadiyahMalang.

H. Rosmayanti, H. Aryadita, and A. D. Herlambang, “AnalisisPenerimaanTeknologiCloud Storage Menggunakan Technology Readiness Acceptance Model (TRAM) Pada Badan Eksekutif Mahasiswa Institut Teknologi Sepuluh Nopember”,vol.2,no.10,pp. 3632_3639,2018

A. P. Kegunaan, P. Kemudahan, K. T. Informasi, D. A. N. Kerahasiaan, T. Minat, and L. Santioso, “Penggunaan E-Filling,” vol. 18, no. 2,2018.

F. Yusup, “UjiValiditas dan Reliabilitas Instrumen PenelitianKuantitatif,”J. Tarb.J.Ilm.Kependidikan, vol. 7, no. 1, pp. 17–23, 2018, doi: 10.18592/tarbiyah.v7i1.2100.

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 7 > >>