The acceptance rate | 16 % |
Submission to a final decision | 138 days |
Sinta Impact | 1.03 |
h-index Google Scholar | 15 |
This journal uses the names Jurnal Teknik Industri and J Tek Ind (abbreviation) to be used in references. Jurnal Teknik Industri Citedness in Scopus: 60times (Scopus, EXPORT DATE: 30 November 2021)
The list of articles is as follows:
No |
Article |
Cited by |
1 |
Agustiandi, A., Aritonang, Y. M. K., & Rikardo, C. (2021). Integrated Inventory Model for Single Vendor Multi-Buyer with a Single Item by Considering Warehouse and Capital Constraint. Jurnal Teknik Industri, 22(1), 71-84. |
Woo, Y. B., Moon, I., & Kim, B. S. (2021). Production-Inventory control model for a supply chain network with economic production rates under no shortages allowed. Computers & Industrial Engineering, 160, 107558. |
2 |
Lestari, F., Mas’ari, A., Meilani, S., Riandika, I. N., & Hamid, A. B. A. (2021). Risk Mitigation Via Integrating House of Risk and Probability Impact Matrix in Halal Food Supply Chain. Jurnal Teknik Industri, 22(2), 138-154. |
Angarita-Zapata, J. S., Alonso-Vicario, A., Masegosa, A. D., & Legarda, J. (2021). A Taxonomy of Food Supply Chain Problems from a Computational Intelligence Perspective. Sensors, 21(20), 6910. |
3 |
Putri, S. A., Pujiyanto, E., & Triyono, J. (2019). Optimization of Electroplating Thickness Quality at Hip Joint Implant Using the Taguchi Method. Jurnal Teknik Industri, 20(1), 45-52. |
Dzogbewu, T. C., & du Preez, W. B. (2021). Additive Manufacturing of Titanium-Based Implants with Metal-Based Antimicrobial Agents. Metals, 11(3), 453. |
4 |
Ibrahim, M. F., Putri, M. M., Farista, D., & Utama, D. M. (2021). An Improved Genetic Algorithm for Vehicle Routing Problem Pick-up and Delivery with Time Windows. Jurnal Teknik Industri, 22(1), 1-17. |
Utama, D. M., Fitria, T. A., & Garside, A. K. (2021, June). Artificial Bee Colony Algorithm for Solving Green Vehicle Routing Problems with Time Windows. In Journal of Physics: Conference Series (Vol. 1933, No. 1, p. 012043). IOP Publishing. |
5 |
Hidayat, K., Mu'tamar, M. F. F., Firmansyah, R. A., & Illahi, W. (2019). Instant Corn Rice Product Development. Jurnal Teknik Industri, 20(2), 117-127. |
Hidayat, K., Asfan, D. F., Anggraini, N., & Mahpur, M. (2021, May). Optimization of Production Instant Madura Corn Rice using Response Surface Methodology. In IOP Conference Series: Earth and Environmental Science (Vol. 757, No. 1, p. 012075). IOP Publishing. |
6 |
Hidayat, K., Mu'tamar, M. F. F., Firmansyah, R. A., & Illahi, W. (2019). Instant Corn Rice Product Development. Jurnal Teknik Industri, 20(2), 117-127. |
Hidayat, K., & Nasikin, M. K. (2021, April). Product development of corn rice using value engineering method. In IOP Conference Series: Earth and Environmental Science (Vol. 733, No. 1, p. 012039). IOP Publishing. |
7 |
Masudin, I. (2019). Location-allocation problems in the perspective of supply chain: Approaches and applications. Jurnal Teknik Industri, 20(1), 1-11. |
Cosma, O., Dănciulescu, D., & Pop, P. C. (2019). On the two-stage transportation problem with fixed charge for opening the distribution centers. IEEE Access, 7, 113684-113698. |
8 |
Budiyanto, M. A. K. (2010). Teknik pengembangan industri ekotourisme Kota Batu Propinsi Jawa Timur dalam perspektif kebijakan. Jurnal Teknik Industri, 11(1), 35-41. |
Shabbir, M. S. (2019). Informal shariah pawnshop in the traditional markets of Surakarta. Journal of Islamic Marketing. |
9 |
Putri, D. A. P. (2016). Vehicle routing problem dengan time window untuk multiple product dan multiple route Menggunakan algoritma sequential insertion. Jurnal Teknik Industri, 17(1), 22-30. |
Utama, D. M., Dewi, S. K., Wahid, A., & Santoso, I. (2020). The vehicle routing problem for perishable goods: A systematic review. Cogent Engineering, 7(1), 1816148. |
10 |
Mas' udin, I., & Kamara, M. S. (2017). Electronic Data Interchange and Demand Forecasting Implications on Supply Chain Management Collaboration: A Customer Service Perspective. Jurnal Teknik Industri, 18(2), 138-148. |
Tijan, E., Jović, M., Jardas, M., & Gulić, M. (2019). The Single Window concept in international trade, transport and seaports. Pomorstvo, 33(2), 130-139. |
11 |
Rahmana, A. (2012). Strategi pengembangan usaha kecil menengah sektor industri pengolahan. Jurnal Teknik Industri, 13(1), 14-21. |
Hendriani, S. (2018). The role of cooperative development strategy to improving the success of village cooperative (KUD) in Riau Indonesia. International Journal of Law and Management. |
12 |
Restuputri, D. P., Pangesti, A. K., & Garside, A. K. (2019). The measurement of Physical Workload and Mental Workload Level of Medical Personnel. Jurnal Teknik Industri, 20(1), 34-44. |
Nasirizad Moghadam, K., Chehrzad, M. M., Reza Masouleh, S., Maleki, M., Mardani, A., Atharyan, S., & Harding, C. (2021). Nursing physical workload and mental workload in intensive care units: Are they related?. Nursing Open. |
13 |
Utama, D. M. (2019). An effective hybrid sine cosine algorithm to minimize carbon emission on flow-shop scheduling sequence dependent setup. Jurnal Teknik Industri, 20(1), 62-72. |
Dewi, S. K., & Utama, D. M. (2021). A New Hybrid Whale Optimization Algorithm for Green Vehicle Routing Problem. Systems Science & Control Engineering, 9(1), 61-72. |
14 |
Mas' udin, I., & Kamara, M. (2018). Impact of just-in-time, total quality management and supply chain management on organizational performance: A review perspective. Jurnal Teknik Industri, 19(1), 11-20. |
Effects of JIT, TQM competences and product design on financial performance of the firm: Does supply chain moderates?, International Journal of Supply Chain Management, 2020 |
15 |
Giyanti, I., & Indriastiningsih, E. (2019). Effect of SME Food Entrepreneurs Knowledge on Halal Certification for Certified Awareness Using Partial Least Square. Jurnal Teknik Industri, 20(2), 140-151. |
Agustini, K., Darmawiguna, I., Artayasa, I., & Mertayasa, I. (2020). Evaluation of the Teachers' Acceptance to E-Report Card Applications with the Hot-Fit Model Approach. International Journal of Instruction, 13(3), 475-490. |
16 |
Fatma, E., & Pulungan, D. S. (2018). Analisis Pengendalian Persediaan Menggunakan Metode Probabilistik dengan Kebijakan Backorder dan Lost sales. Jurnal Teknik Industri, 19(1), 38-48. |
Saragiha, N. I., & Lumban Tobinga, M. D. (2020). The Application of Inventory Model in Material Planning Department atCompany of XYZ. International Journal of Psychosocial Rehabilitation, 24(2). |
17 |
Gunadi, F. A., Lesmono, D., & Aritonang, K. (2020). A routing model for hybrid hub-and-spoke with time windows. Jurnal Teknik Industri, 21(1), 22-33. |
Utama, D. M., Widodo, D. S., Ibrahim, M. F., & Dewi, S. K. (2020). A New Hybrid Butterfly Optimization Algorithm for Green Vehicle Routing Problem. Journal of Advanced Transportation, 2020. |
18 |
Utama, D. M. (2019). An effective hybrid sine cosine algorithm to minimize carbon emission on flow-shop scheduling sequence dependent setup. Jurnal Teknik Industri, 20(1), 62-72. |
Utama, D. M., Widodo, D. S., Ibrahim, M. F., & Dewi, S. K. (2020). A New Hybrid Butterfly Optimization Algorithm for Green Vehicle Routing Problem. Journal of Advanced Transportation, 2020. |
19 |
Mas' udin, I., & Kamara, M. S. (2017). Electronic Data Interchange and Demand Forecasting Implications on Supply Chain Management Collaboration: A Customer Service Perspective. Jurnal Teknik Industri, 18(2), 138-148. |
Jović, M., Tijan, E., Perić Hadžić, A., & Karanikić, P. (2020). Economic aspects of automation innovations in electronic transportation management systems. Pomorstvo, 34(2), 417-427. |
20 |
Saati, E. A., Theovilla, R. R. D., Widjanarko, S. B., & Aulanni'am, A. (2012). Optimalisasi Fungsi Pigmen Bunga Mawar Sortiran Sebagai Zat Pewarna Alami Dan Bioaktif Pada Produk Industri. Jurnal Teknik Industri, 12(2), 133-140. |
Wahyuni, S., Saati, E. A., Winarsih, S., Susetyarini, E., & Rochmah, T. W. (2020). THE COMBINATION OF DRAGON FRUITS SKIN AND TEAK LEAVES ANTHOCYANIN EXTRACT AS SOYMILK'S NATURAL DYE. The Iraqi Journal of Agricultural Science, 51(4), 1188-1194. |
21 |
Handajani, H. (2011). Optimalisasi substitusi tepung Azolla terfermentasi pada pakan ikan untuk meningkatkan produktivitas ikan nila gift. Jurnal teknik industri, 12(2), 177-181. |
Yuli, A., Iskandar, H. T., Irfan, Z., & Sudarsa, D. (2020). Effect of Chromium Addition in Lemna sp. on Feed Conversion and Chromium Retention in Gourami (Osphronemus goramy) Flesh. Research Journal of Chemistry and Environment.Vol, 24, 1. |
22 |
Faridah, A., Widjanarko, S. B., Sutrisno, A. J. I., & Susilo, B. (2012). Optimasi produksi tepung porang dari chip porang secara mekanis dengan metode permukaan respons. Jurnal Teknik Industri, 13(2), 158-166. |
Hermanto, M. B., Widjanarko, S. B., Suprapto, W., & Suryanto, A. The Design and Performance of Continuous Porang (Amorphophallus muelleri Blume) Flour Mills. |
23 |
Mas' udin, I. (2009). Penerapan Fuzzy Analytichal Hierarchy Process untuk Pemilihan Alternatif Solusi Pengurangan Bullwhip Effect. Jurnal Teknik Industri, 9(2), 183-190. |
Leonardo, J., Young, J. C., & Hansun, S. (2019). EARLY DETECTION OF PULMONARY TUBERCULOSIS DISEASE WITH FUZZY AHP EXPERT SYSTEM. COMPUSOFT: An International Journal of Advanced Computer Technology, 8(10). |
24 |
Kholik, H. M., & Krishna, D. A. (2012). Analisis Tingkat Kebisingan Peralatan Produksi Terhadap Kinerja Karyawan. Jurnal Teknik Industri, 13(2), 194-200. |
Suhardi, B., Abdu Haq Navi, M., & Dwi Astuti, R. (2019). Noise level analysis to reduce noise exposure at PT. IT. Cogent Engineering, 6(1), 1666629. |
25 |
Sulaksmi, A., Garside, A. K., & Hadziqah, F. (2014). Penjadwalan Produksi Dengan Algoritma Heuristik Pour (Studi Kasus: Konveksi One Way–Malang). Jurnal Teknik Industri, 15(1), 35-44. |
Nugraheni, C. E., & Abednego, L. (2016). A comparison of heuristics for scheduling problems in textile industry. Jurnal Teknologi, 78(6-6). |
26 |
Mudjahidin, M., & Putra, N. D. P. (2012). Rancang bangun sistem informasi monitoring perkembangan proyek berbasis web. Jurnal Teknik Industri, 11(1), 75-83. |
Adhy, S., Prasetio, A., Noranita, B., & Saputra, R. (2018, October). Usability Testing of Weather Monitoring on Android Application. In 2018 2nd International Conference on Informatics and Computational Sciences (ICICoS) (pp. 1-6). IEEE. |
27 |
Handayani, N. U., Santoso, H., & Pratama, A. I. (2012). Faktor-Faktor yang memengaruhi Peningkatan Daya Saing Klaster Mebel di Kabupaten Jepara. Jurnal teknik industri, 13(1), 22-30. |
Sulistiandi, S., Marpaung, B., & Sunardi, O. (2020, April). Clustering on Small-scale Food Manufacturing Industry in West Jakarta: A Fuzzy Analytical Hierarchy Process Approach. In IOP Conference Series: Materials Science and Engineering (Vol. 847, No. 1, p. 012093). IOP Publishing. |
28 |
Dewi, S. K. (2012). Minimasi defect produk dengan konsep six sigma. Jurnal Teknik Industri, 13(1), 43-50. |
Shafira, Y. P., & Mansur, A. (2018). Production quality improvement analysis of grey cambric using Six Sigma Method. In MATEC web of conferences (Vol. 154, p. 01090). EDP Sciences. |
29 |
Nurcahyo, R., Farizal, F., Stiadi, E., & Saparudin, S. (2012). Penentuan Dan Pengembangan Kompetensi Inti Kabupaten Bekasi. Jurnal Teknik Industri, 13(1), 37-42. |
Paramitha, F., & Nurcahyo, R. (2018, January). Industrial strategy development of core competence in Pekalongan City. In Proceedings of the International Conference on Industrial Engineering and Operations Management (pp. 1556-1565). |
30 |
Fatmawati, A., Rosyidi, C. N., & Jauhari, W. A. (2012). Model Pemilihan Proses untuk Meminimalkan Biaya Manufaktur, Kerugian Kualitas, dan Keterlambatan Pengiriman. Jurnal Teknik Industri, 13(2), 109-115. |
Rosyidi, C. N., Pratama, M. A., Jauhari, W. A., Suhardi, B., & Hamada, K. (2015, November). Make or buy decision model with multi-stage manufacturing process to minimize manufacturing cost and quality loss. In Proceedings of the Joint International Conference on Electric Vehicular Technology and Industrial, Mechanical, Electrical and Chemical Engineering (ICEVT & IMECE) (pp. 189-193). IEEE. |
31 |
Lesmana, N. I. (2016). Penjadwalan Produksi Untuk Meminimalkan Waktu Produksi Dengan Menggunakan Metode Branch And Bound. Jurnal Teknik Industri, 17(1), 42-50. |
Mazda, C. N., & Kurniawati, D. A. (2020, December). Branch and Bound Method to Overcome Delay Delivery Order in Flow Shop Scheduling Problem. In IOP Conference Series: Materials Science and Engineering (Vol. 1003, No. 1, p. 012129). IOP Publishing. |
32 |
Lukman, M., & Wulandari, W. (2018). Peningkatan Kualitas Produk Cokelat Dengan Integrasi Metode Kano Dan QFD. Jurnal Teknik Industri, 19(2), 190-204. |
Ginting, R., Ishak, A., & Ricky, J. (2020, December). Product Design of Massage Cap by Using Nigel Cross Approach. In IOP Conference Series: Materials Science and Engineering (Vol. 1003, No. 1, p. 012007). IOP Publishing. |
33 |
Handayani, N. U., Santoso, H., & Pratama, A. I. (2012). Faktor-Faktor yang memengaruhi Peningkatan Daya Saing Klaster Mebel di Kabupaten Jepara. Jurnal teknik industri, 13(1), 22-30. |
Durachman, Y., Harahap, D., Rodoni, A., Bakti, A. M. F., & Mansoer, M. (2020, October). Analysis of Factors That Affect The Quality of E-Government Services: A Case Study in Ombudsman of the Republic of Indonesia. In 2020 8th International Conference on Cyber and IT Service Management (CITSM) (pp. 1-7). IEEE. |
34 |
Restuputri, D. P. (2017). Metode REBA Untuk Pencegahan Musculoskeletal Disorder Tenaga Kerja. Jurnal Teknik Industri, 18(1), 19-28. |
Nurwahidah, A., & Satria, D. N. (2020, July). Ergonomic risk analysis of lecture chairs at the engineering faculty, Hasanuddin University. In IOP Conference Series: Materials Science and Engineering (Vol. 885, No. 1, p. 012033). IOP Publishing. |
35 |
Utama, D. M. (2017). Model Penentuan Lot Pemesanan Dengan Mempertimbangkan Unit Diskon dan Batasan Kapasitas Gudang dengan Program Dinamis. Jurnal Teknik Industri, 18(1), 94-102. |
Utama, D. M., Widodo, D. S., Ibrahim, M. F., Hidayat, K., & Dewi, S. K. (2020, July). The Sustainable Economic Order Quantity Model: A Model Consider Transportation, Warehouse, Emission Carbon Costs, and Capacity Limits. In Journal of Physics: Conference Series (Vol. 1569, No. 2, p. 022095). IOP Publishing. |
36 |
Indriartiningtias, R., & Wirajmadja, I. I. (2009). Pengembangan Model Konseptual Transfer Pengetahuan dari Perguruan Tinggi ke Industri Kecil. Jurnal Teknik Industri, 10(2), 158-166. |
Indriartiningtias, R., Rahadiyan, W. A., & Hartono, B. (2020, July). Key Factors of Success Technology Transfer from Higher Education To Creative Industry in Bangkalan, Madura. In Journal of Physics: Conference Series (Vol. 1569, No. 3, p. 032028). IOP Publishing. |
37 |
Fatma, E., & Pulungan, D. S. (2018). Analisis Pengendalian Persediaan Menggunakan Metode Probabilistik dengan Kebijakan Backorder dan Lost sales. Jurnal Teknik Industri, 19(1), 38-48. |
Hoswari, S., Gozali, L., Marie, I. A., & Sukania, I. W. (2020, July). Comparison Study about Inventory Control System from Some Papers in Indonesian Case Study. In IOP Conference Series: Materials Science and Engineering (Vol. 852, No. 1, p. 012110). IOP Publishing. |
38 |
Hartatik, H., & Baroto, T. (2017). Strategi pengembangan bisnis dengan metode business model canvas. Jurnal Teknik Industri, 18(2), 113-120. |
Afni, N., Yani, M., & Udin, F. (2020, April). Formulation of strategies for developing local chocolate product Socolatte in Pidie Jaya. In IOP Conference Series: Earth and Environmental Science (Vol. 472, No. 1, p. 012043). IOP Publishing. |
39 |
Rahayuningsih, S. (2014). Analisis perbaikan kondisi lingkungan kerja terhadap beban kerja mental. Jurnal Teknik Industri, 15(1), 80-87. |
Herwanto, D., & Suzianti, A. (2020, June). An Environmental Ergonomics Review of Small Medium Enterprises Workplace Condition in Indonesia. In Proceedings of the 3rd Asia Pacific Conference on Research in Industrial and Systems Engineering 2020 (pp. 213-218). |
40 |
Kurniawan, R. A., & Kholik, H. M. (2015). Usulan Perawatan Mesin Stitching Dengan Metode Reliability Centered Maintenance. Jurnal Teknik Industri, 16(2), 83-91. |
Rizkya, I., Siregar, I., & Siregar, K. (2020, May). Determination of component categories using logic tree analysis. In IOP Conference Series: Materials Science and Engineering (Vol. 801, No. 1, p. 012111). IOP Publishing. |
41 |
Restuputri, D. P. (2018). Penilaian risiko gangguan musculoskeletal disorder pekerja batik dengan menggunakan metode strain index. Jurnal Teknik Industri, 19(1), 97-106. |
Restuputri, D. P., Masudin, I., & Putri, A. R. C. (2020, April). The comparison of ergonomic risk assessment results using job strain index and OCRA methods. In IOP Conference Series: Materials Science and Engineering (Vol. 821, No. 1, p. 012029). IOP Publishing. |
42 |
Pratama, H. H. (2015). Peningkatan Produktivitas Dan Kinerja Lingkungan Menggunakan Metode Green Productivity. Jurnal Teknik Industri, 16(2), 63-73. |
Mubin, A. (2020, April). Green productivity application for improving productivity and environmental performance through the selection of the best solution scenario in the agroindustry. In IOP Conference Series: Materials Science and Engineering (Vol. 821, No. 1, p. 012031). IOP Publishing. |
43 |
Lukman, M., & Wulandari, W. (2018). Peningkatan Kualitas Produk Cokelat Dengan Integrasi Metode Kano Dan QFD. Jurnal Teknik Industri, 19(2), 190-204. |
Saragih, L. L., Simarmata, E., Aloina, G., Tarigan, U. P., Ramadhani, V. B., & Ginting, S. E. (2020, May). Product development of canned fish using SWOT and quality function deployment (QFD). In AIP Conference Proceedings (Vol. 2227, No. 1, p. 040017). AIP Publishing LLC. |
44 |
Mudjahidin, M., & Putra, N. D. P. (2012). Rancang bangun sistem informasi monitoring perkembangan proyek berbasis web. Jurnal Teknik Industri, 11(1), 75-83. |
Syamsiana, I. N., Setiawan, A., & Saputra, M. (2020). Design of Energy Database Management System (EDBMS) on the unit 2 outgoing transformer at the State Polytechnic of Malang. In IOP Conference Series: Materials Science and Engineering (Vol. 732, No. 1, p. 012052). IOP Publishing. |
45 |
Pusporini, P., & Andesta, D. (2012). Integrasi Model Lean Sigma Untuk Peningkatan Kualitas Produk. Jurnal Teknik Industri, 10(2), 91-97. |
Henny, H., Andriana, I., Latifah, A. N., & Haryanto, H. (2019, November). The Application Lean Six Sigma Method Approach to Minimize Waste. In IOP Conference Series: Materials Science and Engineering (Vol. 662, No. 2, p. 022089). IOP Publishing. |
46 |
Dewi, S. K. (2012). Minimasi defect produk dengan konsep six sigma. Jurnal Teknik Industri, 13(1), 43-50. |
Robecca, J., & Putra, A. P. (2019, November). Trash Click Design Using House of Quality. In IOP Conference Series: Materials Science and Engineering (Vol. 662, No. 2, p. 022134). IOP Publishing. |
47 |
Budiyanto, M. A. K. (2012). Model pengembangan ketahanan pangan berbasis pisang melalui revitalisasi nilai kearifan lokal. Jurnal Teknik Industri, 11(2), 170-177. |
Zuhri, S., Herawan, T., Wening, N., & Harsono, M. (2019). A Review on Human Resource Management Based on Local Wisdom. J. Advanced Res. L. & Econ., 10, 1746. |
48 |
Azizah, I. N., Lestari, R. N., & Purba, H. H. (2018). Penerapan metode Quality Function Deployment dalam memenuhi kepuasan konsumen pada industri komponen otomotif. Jurnal Teknik Industri, 19(2), 127-136. |
Syahputri, K., Siregar, I., Rizkya, I., & Sari, R. M. (2019, August). Determination of Technical Characteristics in Panel Button and Control Seat Using Quality Function Deployment. In 2019 International Conference on Sustainable Engineering and Creative Computing (ICSECC) (pp. 412-415). IEEE. |
49 |
Restuputri, D. P. (2017). Metode REBA Untuk Pencegahan Musculoskeletal Disorder Tenaga Kerja. Jurnal Teknik Industri, 18(1), 19-28. |
Nurwahidah, A. (2019, May). Ergonomics Risk Analysis Of Public Transportation Drivers (Study Case: Public Transportation Drivers In Makassar City). In IOP Conference Series: Materials Science and Engineering (Vol. 505, No. 1, p. 012138). IOP Publishing. |
50 |
Faridah, A., Widjanarko, S. B., Sutrisno, A. J. I., & Susilo, B. (2012). Optimasi produksi tepung porang dari chip porang secara mekanis dengan metode permukaan respons. Jurnal Teknik Industri, 13(2), 158-166. |
Hermanto, M. B., Widjanarko, S. B., Suprapto, W., & Suryanto, A. (2019, June). Parameter estimation for porang (Amorphophallus muelleri Blume) chips milling by using a batch type of ball mills. In IOP Conference Series: Materials Science and Engineering (Vol. 546, No. 3, p. 032015). IOP Publishing. |
51 |
Himawanto, D. A., Saptoadi, H., Rohmat, T. A., & Indarto, I. (2010). Pengolahan Sampah Kota Terseleksi Menjadi Refused Derived Fuel Sebagai Bahan Bakar Padat Alternatif. Jurnal Teknik Industri, 11(2), 127-133. |
Saputra, M. Z., Himawanto, D. A., Tjahjana, D. D. D. P., & Pitana, T. S. (2019, April). Combustion characteristics of Albizia Chinensis and Tectona Grandis sawdust and a mixture of both using thermogravimetry analysis. In AIP Conference Proceedings (Vol. 2097, No. 1, p. 030079). AIP Publishing LLC. |
52 |
Putra, G., Harijono, H., Susanto, S., Kumalaningsih, K., & Aulanni’am, A. (2009). Optimasi Kondisi Depolimerisasi Pulp Biji Kakao. Jurnal Teknik Industri, 9(1), 45-54. |
Razak, A. D., Natsir, A., & Islamiyati, R. (2019, March). Nutrient digestibility of complete feed containing cocoa pulp with different fiber sources for local goat. In IOP Conference Series: Earth and Environmental Science (Vol. 247, No. 1, p. 012041). IOP Publishing. |
53 |
Bintang, A. N., & Dewi, S. K. (2017). Analisa postur kerja menggunakan metode owas dan rula. Jurnal Teknik Industri, 18(1), 43-54. |
Pradani, W. R., Rahayu, M., Martini, S., & Kurniawan, M. I. (2019, May). Design of Wood Pellets Carrier using Ergonomic Function Deployment (EFD) Approach to Increase Productivity of Work: A Research at PTPN VIII Ciater. In IOP Conference Series: Materials Science and Engineering (Vol. 528, No. 1, p. 012011). IOP Publishing. |
54 |
Irawati, D. Y., & Ezrani, O. (2018). Servqual dan Conjoint Analysis Dalam House of Quality Untuk Layanan Ojek Online. Jurnal Teknik Industri, 19(1), 82-96. |
Refinda, D., Liquiddanu, E., Suletra, I. W., Sutopo, W., & Budijanto, M. (2019, May). Designing technical specifications for goyor woven fabric as material for civil servant official uniforms using quality function deployment and conjoint analysis. In IOP Conference Series: Materials Science and Engineering (Vol. 528, No. 1, p. 012024). IOP Publishing. |
55 |
Restuputri, D. P. (2018). Penilaian risiko gangguan musculoskeletal disorder pekerja batik dengan menggunakan metode strain index. Jurnal Teknik Industri, 19(1), 97-106. |
Cahyadi, D., Muis, A., & Etwin, F. S. (2018, October). Evaluation of Work-Related Musculoskeletal Disorders in The Food Products Industry of Amplang Using NBM Questionnare and RULA Methods. In 2018 International Conference on Applied Science and Technology (iCAST) (pp. 408-411). IEEE. |
56 |
Budiyanto, M. A. K. (2012). Optimasi pengembangan kelembagaan industri pangan organik di Jawa Timur. Jurnal teknik industri, 12(2), 169-176. |
Maulidian, M. Arman, Maulidian, lOP. (2018) IOP Conference Series: Earth and Environmental Science The Strategic Industry of East Java Economy |
57 |
Mudjahidin, M., & Putra, N. D. P. (2012). Rancang bangun sistem informasi monitoring perkembangan proyek berbasis web. Jurnal Teknik Industri, 11(1), 75-83. |
Marpaung, S. T., & Rosyidi, C. N. (2018, February). The development of daily monitoring tool in a service part manufacturing company. In AIP Conference Proceedings (Vol. 1931, No. 1, p. 030025). AIP Publishing LLC. |
58 |
Dewi, S. K. (2012). Minimasi defect produk dengan konsep six sigma. Jurnal Teknik Industri, 13(1), 43-50. |
Suryadi, A., & Ngatilah, Y. (2018). Quality Analysis of Ceramic Tent Product With Six Sigma Method in PT. Mas Keramik KIA. In Journal of Physics: Conference Series (Vol. 953, No. 1, p. 012222). IOP Publishing. |
59 |
Rahmana, A. (2012). Strategi pengembangan usaha kecil menengah sektor industri pengolahan. Jurnal Teknik Industri, 13(1), 14-21. |
Elya, N., Shoimah, F., Kartika, A. P., & Sukanto, A. B. (2017, June). Strategic Planning of small and medium industries. Case study: Hulu Sungai Selatan Regency, South Borneo Province. In IOP Conference Series: Earth and Environmental Science (Vol. 70, No. 1, p. 012042). IOP Publishing. |
60 |
Widyastuti, W., FF, F. Y., Rochiem, R., & Purwaningsih, H. (2011). Synthesis Of Nanoparticle Barium Hex Aferrite By Sol Gel Auto Combutio. Jurnal Teknik Industri, 12(2), 156-161. |
Mahdiani, M., Sobhani, A., Ansari, F., & Salavati-Niasari, M. (2017). Lead hexaferrite nanostructures: green amino acid sol–gel auto-combustion synthesis, characterization and considering magnetic property. Journal of Materials Science: Materials in Electronics, 28(23), 17627-17634. |
OUR EDITORIAL TEAM |
Editor in Chief |
|
Dana Marsetiya Utama University of Muhammadiyah Malang, Malang, Indonesia |
|
Managing Editor |
|
Thomy Eko Saputro University of Muhammadiyah Malang, Malang, Indonesia |
|
Associate Editor |
|
Prof. Benny Tjahjono Coventry University, Coventry, United Kingdom |
|
Ferry Jie Edith Cowan University, Perth, Australia |
|
CITATION ANALYSIS |
Jurnal Teknik Industri Citedness in Scopus: 60 times (Scopus, EXPORT DATE: 30 November 2021) See More.
ISSN PRINT |
ISSN ONLINE |