Sustainable EOQ Model with Multi Container Transportation Problems
DOI:
https://doi.org/10.22219/JTIUMM.Vol22.No2.236-244Keywords:
inventory, Sustainable EOQ, Carbon Emissions, TransAbstract
Industrial developments and environmental problems encourage decision-makers to determine optimal decisions. In addition, transportation is an aspect that has a significant contribution to environmental damage. Therefore, inventory and transportation decisions need to be integrated to minimize environmental problems. This study made an effort to develop a model of Sustainable EOQ with Multi Container Transportation Problems. The optimal procedure was proposed to determine the optimal number of containers in one vehicle. The results suggested that the proposed procedure could minimize the total annual inventory cost compared to the company's current solution.
Downloads
References
M. F. Ibrahim, M. M. Putri, and D. M. Utama, "A literature review on reducing carbon emission from supply chain system: drivers, barriers, performance indicators, and practices," IOP Conference Series: Materials Science and Engineering, vol. 722, p. 012034, 2020. http://doi.org/10.1088/1757-899x/722/1/012034.
A. Agustiandi, Y. M. K. Aritonang, and C. Rikardo, "Integrated Inventory Model for Single Vendor Multi-Buyer with a Single Item by Considering Warehouse and Capital Constraint," Jurnal Teknik Industri, vol. 22, no. 1, pp. 71-84, 2021. http://doi.org/10.22219/JTIUMM.Vol22.No1.71-84.
S. Mitra, "Inventory management in a two-echelon closed-loop supply chain with correlated demands and returns," Computers & Industrial Engineering, vol. 62, no. 4, pp. 870-879, 2012. https://doi.org/10.1016/j.cie.2011.12.008.
D. M. Utama, H. M. Kholik, and A. F. Mulya, "Integrated Procurement-Production Inventory Model with Two-Stage Production," Jurnal Teknik Industri, vol. 21, no. 2, pp. 185-199, 2020. http://doi.org/10.22219/JTIUMM.Vol21.No2.185-199.
F. W. Harris, "How many parts to make at once," The Magazine of Management, vol. 10, pp. 135-136, 1913.
E. Taft, "The most economical production lot," Iron Age, vol. 101, no. 18, pp. 1410-1412, 1918.
D. M. Utama, D. P. Wardani, S. T. Halifah, and D. C. Pradikta, "Model Economic Production Quantity dengan Rework Process dan Batasan Gudang," Jurnal Sistem dan Manajemen Industri, vol. 3, no. 1, pp. 43-49, 2019. http://doi.org/10.30656/jsmi.v3i1.1017.
M. Bonney and M. Y. Jaber, "Environmentally responsible inventory models: Non-classical models for a non-classical era," International Journal of Production Economics, vol. 133, no. 1, pp. 43-53, 2011. https://doi.org/10.1016/j.ijpe.2009.10.033.
D. S. Widodo and D. M. Utama, "Analisis Model Sustainable Economic Order Quantity Dengan Mempertimbangkan Emisi Karbon Dan Batasan Kapasitas Gudang Untuk Menekan Total Biaya Persediaan," Teknik, vol. 40, no. 3, pp. 169-175, 2019. http://doi.org/10.14710/teknik.v40i3.24508.
S. K. D. B. Maulana et al., "The Capacitated Sustainable EOQ Models: Models Considering Tax Emissions," vol. 21, no. 1, pp. 12-21, 2020. https://doi.org/10.22219/JTIUMM.Vol21.No1.12-21.
T. Abdallah, A. Diabat, and D. Simchi-Levi, "Sustainable supply chain design: a closed-loop formulation and sensitivity analysis," Production Planning & Control, vol. 23, no. 2-3, pp. 120-133, 2012. http://doi.org/10.1080/09537287.2011.591622.
A. Gurtu, M. Y. Jaber, and C. Searcy, "Impact of fuel price and emissions on inventory policies," Applied Mathematical Modelling, vol. 39, no. 3, pp. 1202-1216, 2015. https://doi.org/10.1016/j.apm.2014.08.001.
R. Hammami, I. Nouira, and Y. Frein, "Carbon emissions in a multi-echelon production-inventory model with lead time constraints," International Journal of Production Economics, vol. 164, pp. 292-307, 2015. https://doi.org/10.1016/j.ijpe.2014.12.017.
A. H. Nobil and A. A. Taleizadeh, "A single machine EPQ inventory model for a multi-product imperfect production system with rework process and auction," International Journal of Advanced Logistics, vol. 5, no. 3-4, pp. 141-152, 2016. http://doi.org/10.1080/2287108X.2016.1207975.
D. K. Jana, K. Maity, and T. K. Roy, "Multi-item production inventory model with fuzzy rough coefficients via geometric programming approach," Opsearch, vol. 50, no. 4, pp. 475-490, 2013. http://doi.org/10.1007/s12597-013-0122-9.
U. Mishra, J.-Z. Wu, and B. Sarkar, "A sustainable production-inventory model for a controllable carbon emissions rate under shortages," Journal of Cleaner Production, vol. 256, p. 120268, 2020. https://doi.org/10.1016/j.jclepro.2020.120268.
T. Rossi, R. Pozzi, and M. Testa, "EOQ-based inventory management in single-machine multi-item systems," Omega, vol. 71, pp. 106-113, 2017. https://doi.org/10.1016/j.omega.2016.10.002.
B. Rabta, "An Economic Order Quantity inventory model for a product with a circular economy indicator," Computers & Industrial Engineering, vol. 140, p. 106215, 2020. https://doi.org/10.1016/j.cie.2019.106215.
M. R. Hasan, T. C. Roy, Y. Daryanto, and H.-M. Wee, "Optimizing inventory level and technology investment under a carbon tax, cap-and-trade and strict carbon limit regulations," Sustainable Production and Consumption, vol. 25, pp. 604-621, 2021. https://doi.org/10.1016/j.spc.2020.12.005.
U. Mishra, J.-Z. Wu, and M.-L. Tseng, "Effects of a hybrid-price-stock dependent demand on the optimal solutions of a deteriorating inventory system and trade credit policy on re-manufactured product," Journal of Cleaner Production, vol. 241, p. 118282, 2019. https://doi.org/10.1016/j.jclepro.2019.118282.
S. R. Swenseth and M. R. Godfrey, "Incorporating transportation costs into inventory replenishment decisions," International Journal of Production Economics, vol. 77, no. 2, pp. 113-130, 2002. https://doi.org/10.1016/S0925-5273(01)00230-4.
K. Ertogral, M. Darwish, and M. Ben-Daya, "Production and shipment lot sizing in a vendor–buyer supply chain with transportation cost," European Journal of Operational Research, vol. 176, no. 3, pp. 1592-1606, 2007. https://doi.org/10.1016/j.ejor.2005.10.036.
Q.-H. Zhao, S.-Y. Wang, K. K. Lai, and G.-P. Xia, "Model and algorithm of an inventory problem with the consideration of transportation cost," Computers & Industrial Engineering, vol. 46, no. 2, pp. 389-397, 2004. https://doi.org/10.1016/j.cie.2003.12.019.
S.-K. Lee, S. H. Yoo, and T. Cheong, "Sustainable EOQ under Lead-Time Uncertainty and Multi-Modal Transport," Sustainability, vol. 9, no. 3, 2017. http://doi.org/10.3390/su9030476.
H.-J. Lin, "Investing in Transportation Emission Cost Reduction on Environmentally Sustainable EOQ Models with Partial Backordering," Journal of Applied Science and Engineering, vol. 21, no. 3, pp. 291-303, 2018. http://doi.org/10.6180/jase.201809_21(3).0001.
Y. Bouchery, A. Ghaffari, Z. Jemai, and J. Fransoo, "Sustainable transportation and order quantity: insights from multi-objective optimization," Flexible Services and Manufacturing Journal, vol. 28, no. 3, pp. 367-396, 2016. http://doi.org/10.1007/s10696-016-9240-z.
D. M. Utama, D. S. Widodo, M. F. Ibrahim, K. Hidayat, and S. K. Dewi, "The Sustainable Economic Order Quantity Model: A Model Consider Transportation, Warehouse, Emission Carbon Costs, and Capacity Limits," Journal of Physics: Conference Series, vol. 1569, pp. 022095, 2020. http://doi.org/10.1088/1742-6596/1569/2/022095.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Ahmad Mubin, Fahmi Syahril, Tyas Yuli Rosiani
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
