Implementation of Lean Construction to Eliminate Waste: A Case Study Construction Project in Indonesia
DOI:
https://doi.org/10.22219/JTIUMM.Vol23.No1.1-16Keywords:
Lean Construction, Waste, Value Stream Mapping, Waste Assessment Model, Process Cycle EfficiencyAbstract
Lean Construction (LC) presented innovative practices to maximize the production value and minimize the production waste during construction. The problem that frequently occurs in the project is delaying the schedule, leading to time and cost overrun. This research aims to eliminate waste that causes delay and inefficiency. Several LC techniques were carried out to improve the efficiency of this project, namely: Value Stream Mapping (VSM) to discover wastes and determine Process Efficiency Cycle (PCE); Waste Assessment Model (WAM) to identify the inter-relationship among wastes; Fishbone (Ishikawa) diagram analysis to get the root cause of the waste. Research results showed the three highest wastes: defect 14.06%, over production 21.44%, and the highest rank was unnecessary inventories 31.73%. After implementing LC techniques, the PCE increased from 72 % to 79%. The implication of this research is to provide recommendations to the project’s stakeholders in running the building construction to avoid delay and inefficiency.
Downloads
References
P. V. Ramani and L. K. L. Ksd, "Application of lean in construction using value stream mapping," Engineering, Construction and Architectural Management, vol. 28, no. 1, pp. 216-228, 2021. https://doi.org/10.1108/ECAM-12-2018-0572.
M. Aslam, Z. Gao, and G. Smith, "Framework for selection of lean construction tools based on lean objectives and functionalities," International Journal of Construction Management, vol. 22, no. 8, pp. 1559-1570, 2022. https://doi.org/10.1080/15623599.2020.1729933.
P. Nowotarski, J. Pasławski, and J. Matyja, "Improving Construction Processes Using Lean Management Methodologies – Cost Case Study," Procedia Engineering, vol. 161, pp. 1037-1042, 2016. https://doi.org/10.1016/j.proeng.2016.08.845.
A. van den Bos, B. Kemper, and V. de Waal, "A study on how to improve the throughput time of Lean Six Sigma projects in a construction company," International Journal of Lean Six Sigma, vol. 5, no. 2, pp. 212-226, 2014. https://doi.org/10.1108/IJLSS-10-2013-0055.
P. L. Le and N. T. D. Nguyen, "Prospect of lean practices towards construction supply chain management trends," International Journal of Lean Six Sigma, vol. 13, no. 3, pp. 557-593, 2022. https://doi.org/10.1108/IJLSS-06-2020-0071.
R. Al‐Aomar, "A lean construction framework with Six Sigma rating," International Journal of Lean Six Sigma, vol. 3, no. 4, pp. 299-314, 2012. https://doi.org/10.1108/20401461211284761.
M. Braglia, R. Gabbrielli, and L. Marrazzini, "Overall Task Effectiveness: a new Lean performance indicator in engineer-to-order environment," International Journal of Productivity and Performance Management, vol. 68, no. 2, pp. 407-422, 2019. https://doi.org/10.1108/IJPPM-05-2018-0192.
C. Igwe, A. Hammad, and F. Nasiri, "Influence of lean construction wastes on the transformation-flow-value process of construction," International Journal of Construction Management, vol. 22, no. 13, pp. 2598-2604, 2022. https://doi.org/10.1080/15623599.2020.1812153.
J. Shurrab and M. Hussain, "An empirical study of the impact of lean on the performance of the construction industry in UAE," Journal of Engineering, Design and Technology, vol. 16, no. 5, pp. 694-710, 2018. https://doi.org/10.1108/JEDT-09-2017-0095.
L. Koskela, Application of the new production philosophy to construction. Stanford university Stanford, 1992.
S. K. Dewi, D. M. Utama, and R. N. Rohman, "Minimize waste on production process using lean concept," in The 1st Paris Van Java International Seminar on Computer, Science, Engineering, and Technology (PVJ_ISComSET), Tasikmalaya, Indonesia, 2021, vol. 1764, no. 1, p. 012201: IOP Publishing, 2021. https://doi.org/10.1088/1742-6596/1764/1/012201.
D. M. Utama, S. K. Dewi, and V. I. Mawarti, "Identifikasi waste pada proses produksi key set clarinet dengan pendekatan lean manufacturing," Jurnal Ilmiah Teknik Industri, vol. 15, no. 1, pp. 36-46, 2016. https://doi.org/10.23917/jiti.v15i1.1572.
G. N. Yücenur and K. Şenol, "Sequential SWARA and fuzzy VIKOR methods in elimination of waste and creation of lean construction processes," Journal of Building Engineering, vol. 44, p. 103196, 2021. https://doi.org/10.1016/j.jobe.2021.103196.
A. J. Sohi, M. Hertogh, M. Bosch-Rekveldt, and R. Blom, "Does Lean & Agile Project Management Help Coping with Project Complexity?," Procedia - Social and Behavioral Sciences, vol. 226, pp. 252-259, 2016. https://doi.org/10.1016/j.sbspro.2016.06.186.
S. Sarhan, C. Pasquire, A. Elnokaly, and S. Pretlove, "Lean and sustainable construction: a systematic critical review of 25 years of IGLC research," Lean Construction Journal, vol. 2019, pp. 01-20, 2019.
M. S. Bajjou and A. Chafi, "Lean construction implementation in the Moroccan construction industry," Journal of Engineering, Design and Technology, vol. 16, no. 4, pp. 533-556, 2018. https://doi.org/10.1108/JEDT-02-2018-0031.
D. H. Purnomo and M. Lukman, "Reduce Waste using Integration of Lean Six Sigma and TRIZ Method: A Case Study in Wood Industry," Jurnal Teknik Industri, vol. 21, no. 2, pp. 139-152, 2020. https://doi.org/10.22219/JTIUMM.Vol21.No2.139-152.
X. K. Li, X. M. Wang, and L. Lei, "The application of an ANP-Fuzzy comprehensive evaluation model to assess lean construction management performance," Engineering, Construction and Architectural Management, vol. 27, no. 2, pp. 356-384, 2020. https://doi.org/10.1108/ECAM-01-2019-0020.
L. Koskela, An exploration towards a production theory and its application to construction. VTT Technical Research Centre of Finland, 2000.
R. F. Aziz and S. M. Hafez, "Applying lean thinking in construction and performance improvement," Alexandria Engineering Journal, vol. 52, no. 4, pp. 679-695, 2013. https://doi.org/10.1016/j.aej.2013.04.008.
O. Salem, J. Solomon, A. Genaidy, and M. Luegring, "Site implementation and assessment of lean construction techniques," Lean construction journal, vol. 2, no. 2, pp. 1-21, 2005.
W. Xing, J. L. Hao, L. Qian, V. W. Y. Tam, and K. S. Sikora, "Implementing lean construction techniques and management methods in Chinese projects: A case study in Suzhou, China," Journal of Cleaner Production, vol. 286, p. 124944, 2021. https://doi.org/10.1016/j.jclepro.2020.124944.
S. Ghosh and J. Burghart, "Lean Construction: Experience of US Contractors," International Journal of Construction Education and Research, vol. 17, no. 2, pp. 133-153, 2021. https://doi.org/10.1080/15578771.2019.1696902.
O. Ogunbiyi, J. S. Goulding, and A. Oladapo, "An empirical study of the impact of lean construction techniques on sustainable construction in the UK," Construction Innovation, vol. 14, no. 1, pp. 88-107, 2014. https://doi.org/10.1108/CI-08-2012-0045.
M. A. Marhani, A. Jaapar, and N. A. A. Bari, "Lean Construction: Towards Enhancing Sustainable Construction in Malaysia," Procedia - Social and Behavioral Sciences, vol. 68, pp. 87-98, 2012. https://doi.org/10.1016/j.sbspro.2012.12.209.
U. H. Issa, "Implementation of lean construction techniques for minimizing the risks effect on project construction time," Alexandria Engineering Journal, vol. 52, no. 4, pp. 697-704, 2013. https://doi.org/10.1016/j.aej.2013.07.003.
E. Martinez, C. K. Reid, and I. D. Tommelein, "Lean construction for affordable housing: a case study in Latin America," Construction Innovation, vol. 19, no. 4, pp. 570-593, 2019. https://doi.org/10.1108/CI-02-2019-0015.
P. D. Karningsih, D. Anggrahini, M. B. Karim, and R. Adhitama, "Improving project efficiency using lean construction," in 2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation (ICAMIMIA), 2017, pp. 334-336. https://doi.org/10.1109/ICAMIMIA.2017.8387613.
F. D. Ariyanti, A. C. Putri, and D. A. Ningtyas, "Implementation of lean construction and critical chain project management (CCPM) for waste management and work estimation on the Ciawi dam construction project," IOP Conference Series: Earth and Environmental Science, vol. 794, no. 1, p. 012074, 2021. https://doi.org/10.1088/1755-1315/794/1/012074.
H. Prayuda, F. Monika, M. D. Cahyati, B. Afriandini, and D. Budiman, "Critical Review on Development of Lean Construction in Indonesia," pp. 83-88: Atlantis Press. https://doi.org/10.2991/aer.k.210204.018.
A. E. Husin and D. Priyanto, "Lean Construction Based Tower Crane Requirement Optimization In High Rise Building Construction Project," International Journal of Scientific Research Engineering & Technology (IJSRET), ISSN, vol. 7, no. 10, pp. 2278-0882, 2018.
A. Husin and B. Kussumardianadewi, "M-PERT and Lean Construction Integration on Steel Construction Works of Warehouse Buildings," vol. 8, no. 4, pp. 696-702, 2019. https://doi.org/10.13140/RG.2.2.19873.66402.
M. S. Bajjou and A. Chafi, "Lean construction and simulation for performance improvement: a case study of reinforcement process," International Journal of Productivity and Performance Management, vol. 70, no. 2, pp. 459-487, 2021. https://doi.org/10.1108/IJPPM-06-2019-0309.
I. A. Rawabdeh, "A model for the assessment of waste in job shop environments," International Journal of Operations & Production Management, vol. 25, no. 8, pp. 800-822, 2005. https://doi.org/10.1108/01443570510608619.
W. R. Prambudi and I. Giyanti, "Lean Analysis Framework for Waste Management: A Case of Indonesian Textile Company," Jurnal Optimasi Sistem Industri, vol. 20, no. 1, pp. 11-21, 2021. https://doi.org/10.25077/josi.v20.n1.p11-21.2021.
M. F. Suárez-Barraza and F. G. Rodríguez-González, "Cornerstone root causes through the analysis of the Ishikawa diagram, is it possible to find them?," International Journal of Quality and Service Sciences, vol. 11, no. 2, pp. 302-316, 2019. https://doi.org/10.1108/IJQSS-12-2017-0113.
M. H. Hakim and A. Mubin, "Analisis Kinerja Lingkungan Dan Produktivitas Dengan Menggunakan Konsep Green And Lean Productivity," Jurnal Teknik Industri, vol. 17, no. 1, pp. 31-41, 2016. https://doi.org/10.22219/JTIUMM.Vol17.No1.31-41.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Wresni Anggraini, Harpito, Merry Siska, Dian Novitri
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
