Analisa Postur Kerja Menggunakan Metode OWAS dan RULA
DOI:
https://doi.org/10.22219/JTIUMM.Vol18.No1.43-54Keywords:
Musculoskeletal disorders, Nordic Body Map, OWAS, RULAAbstract
Material handling activities of sugar in PG Tjoekir storage warehouse is done manually. Continuous material handling activity can cause musculoskeletal disorders to workers. The distribution of questionnaires Nordic Body Map known some complaints experienced by workers in the process of material handling sugar. The OWAS and RULA methods are methods for evaluating and analyzing worker attitudes that can cause musculoskeletal disorders. Some activities in the storage warehouse PG Tjoekir is ranging from lifting, moving and putting sugar. OWAS method calculation results obtained risk level score 3. Risk level risk of RULA method 4. The calculation results show some worker posture causing musculoskeletal risk so that need improvement. Proposed repair work posture is to design two-wheeled hand truck. Hand trucks help reduce the risk of musculoskeletal injuries for workers.
Downloads
References
E. Nurmianto, Ergonomi, Konsep Dasar dan Aplikasinya: Jakarta:Guna Widya, 1996.
R. S. Bridger, Introduction to Ergonomics: McGraw-Hill, 1995.
W. Susihono, Perbaikan Metode Kerja Berdasarkan Rapid Upper Limb Assesment (RULA) Pada Perusahaan Konstruksi Dan Fabrikasi, 2009.
A. R. Pamula, "Analisis Postur Kerja Pada Aktivitas Manual Material Handling Dengan Menggunakan Metode Penilian Ovako Work Analisis System (OWAS) Pada Pekerja Unit di PT. X Wilayah Semarang," 2012.
B. Triyanto, Analisis Postur Kerja Menggunakan Metode Rula Dan Perancangan Ulang Stasiun Kerja Finishing Batik (Studi Kasus Pada UKM Pembuatan Batik Printing di Desa Pilang, Masaran, Sragen), 2012.
M. Mattila, W. Karwowski, and M. Vilkki, "Analysis of working postures in hammering tasks on building construction sites using the computerized OWAS method," Applied ergonomics, vol. 24, pp. 405-412, 1993.
N. Sari, "Perbaikan Postur Kerja Menurunkan Keluhan Muskuloskeletal dan Waktu Proses Pemahatan di Java Art Stone Yogyakarta," UAJY, 2014.
J. Suwanto, P. Tarwaka, and K. E. Werdani, "Hubungan Antara Risiko Postur Kerja Dengan Risiko Keluhan Muskuloskeletal Pada Pekerja Bagian Pemotongan Besi Di Sentra Industri Pande Besi Padas Klaten," Universitas Muhammadiyah Surakarta, 2016.
N. Dzikrillah and E. N. S. Yuliani, "Analisis Postur Kerja Menggunakan Metode Rapid Upper Limb Assessment (Rula) Studi Kasus PT TJ Forge Indonesia," Jurnal Ilmiah Teknik Industri, vol. 3, 2017.
W. Susihono and E. Rubiati, "Perbaikan Metode Kerja Berdasar Rapid Upper Limb Assessment (RULA) pada Perusahaan Konstruksi dan Fabrikasi," Spektrum Industri, vol. 11, 2013.
J. Priyono, Analisis Postur Kerja Dan Redesign Peralatan Kerja Menggunakan Metode Quick Exposure Check (QEC) Pada Operator Kerajinan Pencetakan Gerabah ( Studi Kasus: Home Industry Bapak Sutrisno, Wedhi, Bayat, Klaten), 2014.
O. Karhu, R. Härkönen, P. Sorvali, and P. Vepsäläinen, "Observing working postures in industry: Examples of OWAS application," Applied Ergonomics, vol. 12, pp. 13-17, 1981.
L. McAtamney and E. N. Corlett, "RULA: a survey method for the investigation of work-related upper limb disorders," Applied ergonomics, vol. 24, pp. 91-99, 1993.
S. Wignjosoebroto, "Ergonomi, Studi Gerak dan Waktu," Edisi pertama. Jakatrta: Penerbit PT. Guna Widya, 1995.
