Perancangan Ulang Fasilitas Dan Ruang Produksi Untuk Meningkatkan Output Produksi
DOI:
https://doi.org/10.22219/JTIUMM.Vol19.No2.157-165Keywords:
Cost of Production, Metal smelting, Facility Layout, ProductivityAbstract
This research discusses the redesign of facility layout on metal smelting SMEs that experienced changes in the type of products produced due to shifting consumer needs. Changes in the type of product produced affect the flow of the production process and result in decreased productivity. This study aims to redesign facilities adapted to the type of product produced. Re-layout processes using the conventional method is started by making the operation process chart, drawing the initial layout, and calculate the total moment of product using the From-to Chart (FTC). By using some trial obtained a trial layout that can increase the productivity based on the total moment of the product and the number of output that can be produced. This study also determines the Cost of Production (HPP) for all metal casting products and compares them with previous conditions. This study shows that by re-layout, the output will be greater and the cost of production is cheaper.Downloads
References
J. M. Apple and N. M. Mardiono, Tataletak pabrik dan pemindahan bahan: Penerbit ITB, 1990.
R. L. Francis, L. F. McGinnis, and J. A. White, Facility layout and location: an analytical approach: Pearson College Division, 1992.
H. R. Ampuh and S. Heri, Tata Letak Pabrik: Penerbit CV. Andi Offset, Yogyakarta, 2008.
S. Wignjosoebroto, "Tata Letak Pabrik dan Pemindahan Bahan," Penerbit Guna Widya, Surabaya, 1996.
M. Arif, Perancangan Tata Letak Pabrik: Deepublish, 2017.
R. Yuliant, A. Saleh, and A. Bakar, "Usulan Perancangan Tata Letak Fasilitas Perusahaan Garmen CV. X dengan menggunakan Metode Konvensional," REKA INTEGRA, vol. 2, 2014.
Y. Y. Prasetya, J. K. Runtuk, and L. P. S. Hartanti, "Analisis Tata Letak Fasilitas Dalam Meminimasi Material Handling (Studi Kasus: Perusahaan Roti Matahari)," 2015.
H. Maheswari and A. D. Firdauzy, "Evaluasi Tata Letak Fasilitas Produksi Untuk Meningkatkan Efisiensi Kerja Pada PT. Nusa Multilaksana," Jurnal Ilmiah Manajemen dan Bisnis Mercu Buana, vol. 1.
D. T. Setiyawan, D. H. Quddsiyah, and S. A. Mustaniroh, "Usulan Perbaikan Tata Letak Fasilitas Produksi Kedelai Goreng dengan Metode BLOCPLAN dan CORELAP (Studi Kasus pada UKM MMM di Gading Kulon, Malang)," Industria: Jurnal Teknologi dan Manajemen Agroindustri, vol. 6, pp. 51-60, 2017.
M. Faishol, S. Hastuti, and M. Ulya, "Perancangan Ulang Tata Letak Fasilitas Produksi Pabrik Tahu Srikandi Junok Bangkalan," AGROINTEK, vol. 7, pp. 59-67, 2016.
C. N. Rubianto and L. Y. Bendatu, "Penentuan Lokasi dan Perancangan Tata Letak Fasilitas Tempat Packaging PT. ABC," Jurnal Titra, vol. 2, pp. 65-70, 2014.
Z. Al Haq, N. S. Antara, and A. Hartiati, "Perancangan Tata Letak Ulang (Relayout) Pabrik Terhadap Tingkat Produksi Produk Bakso Ayam (Studi Kasus Pada Pabrik Bakso UD. Supra Dinasty Denpasar)," Jurnal Rekayasa Dan Manajemen Agroindustri, vol. 3, pp. 80-91.
D. K. Sofyan and S. Syarifuddin, "Perancangan Ulang Tata Letak Fasilitas dengan Menggunakan Metode Konvensional Berbasis 5s (Seiri, Seiton, Seiso, Seiketsu dan Shitsuke)," Jurnal Teknovasi: Jurnal Teknik dan Inovasi, vol. 2, pp. 27-41, 2018.
A. Hadi-Vencheh and A. Mohamadghasemi, "An integrated AHP–NLP methodology for facility layout design," Journal of Manufacturing Systems, vol. 32, pp. 40-45, 2013.
H. Neghabi, K. Eshghi, and M. H. Salmani, "A new model for robust facility layout problem," Information Sciences, vol. 278, pp. 498-509, 2014.
A. Ahmadi, M. S. Pishvaee, and M. R. A. Jokar, "A survey on multi-floor facility layout problems," Computers & Industrial Engineering, vol. 107, pp. 158-170, 2017.
Mulyadi, Akuntansi Biaya. Yogyakarta: Unit Penerbit dan Percetakan Sekolah Tinggi Ilmu Manajemen YKPTN, 2014.
