Usulan Perawatan Mesin Stitching Dengan Metode Reliability Centered Maintenance
DOI:
https://doi.org/10.22219/JTIUMM.Vol16.No2.83-91Keywords:
maintenance, Downtime, Realibility Centered Maintenance, corrective maintenance.Abstract
Based on industrial competition nowadays, production quality occurs to be the main concern of severals top companies. Method of machine maintenance is a way to incresing their production quality. Nowadays, several companies still using a corrective maintenance to maintain their machine, which is all of machine maintenance only be performed if the machine damaged. This thesis only focus to high frequency stitching machine. This thesis using Reability centered maintenance method to obtain optimum maintenance interval. This method gathers 7 step of data processing, starting from data selection, determinating restricions of the system, descripting the system and function of block diagram, and then FMEA (Failure Mode Effect Analysis) and LTA (Logic Tree Analysis). The result of this method is a correct maintenance action for critical components that included in condition directed and time directed categories. Qulitative analysis for Reliability Centered Maintenance method includes types indectification of maintenance, cause of damage and the occuring failure. Resul of the research contain several maintenance actions for critical components using condition directed method and critical component replace schedule using time directed method. From the suggested system maintenance simulation with RCM method, downtime can be decrease until 47,83%.Downloads
References
J. Heo, M. Kim, and J. Lyu, "Implementation of reliability-centered maintenance for transmission components using particle swarm optimization," International Journal of Electrical Power & Energy Systems, vol. 55, pp. 238-245, 2014.
F. Kurniawan, "Manajemen perawatan industri," Yogyakarta. Graha Ilmu, 2013.
P. Chemweno, L. Pintelon, A. Van Horenbeek, and P. Muchiri, "Development of a risk assessment selection methodology for asset maintenance decision making: An analytic network process (ANP) approach," International Journal of Production Economics, vol. 170, pp. 663-676, 2015.
H. J. Groenewald, M. Kleingeld, and J. Vosloo, "A performance-centred maintenance strategy for industrial DSM projects," in Industrial and Commercial Use of Energy (ICUE), 2015 International Conference on the, 2015, pp. 50-53.
B. Yssaad, M. Khiat, and A. Chaker, "Reliability centered maintenance optimization for power distribution systems," International Journal of Electrical Power & Energy Systems, vol. 55, pp. 108-115, 2014.
M. R. Rasindyo, K. Leksananto, and Y. Helianty, "Analisis Kebijakan Perawatan Mesin Cincinnati Dengan Menggunakan Metode Reliability Centered Maintenance Di Pt. Dirgantara Indonesia," REKA INTEGRA, vol. 3, 2015.
W. Hayes, J. Cohen, and R. Ferguson, "Risk Priority Number: A Method for Defect Report Analysis," Carnegie-Mellon Univ Pittsburgh Pa Software Engineering INST2014.
L. Hakim, "Penerapan Rcm Pada Sistem Distribusi Air Di Pdam Pasir Putih Pematangan Barangan Kabupaten Rokan HulU," Jurnal APTEK, vol. 4, pp. 129-140, 2014.
W. Marzocchi, M. Taroni, and J. Selva, "Accounting for epistemic uncertainty in PSHA: Logic tree and ensemble modeling," Bulletin of the Seismological Society of America, vol. 105, pp. 2151-2159, 2015.
T. Annaka, K. Satake, T. Sakakiyama, K. Yanagisawa, and N. Shuto, "Logic-tree approach for probabilistic tsunami hazard analysis and its applications to the Japanese coasts," in Tsunami and Its Hazards in the Indian and Pacific Oceans, ed: Springer, 2007, pp. 577-592.
